Go Back   Rotary Car Club > Tech Discussion > RX-7 3rd Gen Specific (1993-2002)

RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-02-2009, 08:25 PM   #8
Signal 2
Viable Fossil
 
Signal 2's Avatar
 
Join Date: Mar 2008
Location: Mid-West
Posts: 199
Rep Power: 18
Signal 2 is on a distinguished road
FWIW,
If it is the upper control arm bushings sliding fore and aft, you usually only notice it at low speed and only after the car has been loaded one way or another. For example, if you back up slowly and brake it will load the sliding bushings forward. Then when you pull forward you will hear (and sometimes feel) a dull "clunk" as you brake and they move aft. They slide longitudinally along the bolt within those chassis mounting 'ears'. Sometimes you can see evidence of the sliding action if you look closely...but again it's only a 1/4 inch or so.
__________________
Jim
VR R1 FD
Signal 2 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:47 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com