Parting out engine and trans LOTs of aftermarket and stock parts!

ProjectD · 06-30-2009, 08:23 AM

Polished UIM $150
Greddy 2 row FMIC w/ HKS SSQ BOV $900
Defi mechanical Boost gauge $130
HKS EVC IV electronic boost controller $150
Single turbo engine harness with FJO injector driver (low miles) $500
Aspec GT3574 turbo .96 A/R $600
Tial 46mm WG $300
Ported rx7store singleturbo manifold with tial 46mm wg flange $150
NEW air intake temp sensor $40
Bosch 1680cc injectors cleaned and flow tested (5) $ 70 each
Lucas/RC 120lb injectors (1 pair) $90
Fluidyne Radiator w/ stock fan setup $350
FC leading ignition coil (3) $50 each
5 speed tranny w/ gotham short shifter no grinds $400
Supra TT Fuel pump(s) 2 $140 shipped (each)
Big Boy fuel setup (black anodized top feed rails, sard FPR w/gauge and mounting bracket w/ harware. 2 edlebrock 40 micron stainless replaceable stainless steel fuel filters, All lines and fittings required for install. hose is black nylon with SS reinforced braid. This fuel setup will handle whatever you wanna run though it from pumpgas to race gas and even E85. $590
Supra TT Fuel pump(s) 2 $140 shipped

Still have more things to list so check back

Rotary Inspired · 06-30-2009, 11:51 PM

Cyan what are you doing with the car LS1? Interested in your turbo

ProjectD · 07-01-2009, 08:08 AM

Quote:

Originally Posted by Rotary Inspired

Cyan what are you doing with the car LS1? Interested in your turbo

Yes something along those lines...

I'll update this thread with pics as well as more parts.

ProjectD · 07-01-2009, 08:14 AM

Polished UIM $150
Greddy 2 row FMIC w/ HKS SSQ BOV $700
Defi mechanical Boost gauge $130
HKS EVC IV electronic boost controller $150
Single turbo engine harness with FJO injector driver (low miles) $400
Aspec GT3574 turbo .96 A/R $550
Tial 46mm WG $250
Ported rx7store single turbo manifold with tial 46mm wg flange $150
NEW air intake temp sensor $40
Bosch 1680cc injectors cleaned and flow tested (5) $ 65each
Lucas/RC 120lb injectors (1 pair) $80
Fluidyne Radiator w/ stock fan setup $275
FC leading ignition coil (3) $40 each
5 speed tranny no grinds $300
Supra TT Fuel pump(s) 2 $140 shipped (each)
Big Boy fuel setup (black anodized top feed rails, sard FPR w/gauge and mounting bracket w/ harware. 2 edlebrock 40 micron stainless replaceable stainless steel fuel filters, All lines and fittings required for install. hose is black nylon with SS reinforced braid. This fuel setup will handle whatever you wanna run though it from pumpgas to race gas and even E85. $500 (i'll even throw in a pair of1680cc injectors
Also willing to part out the fuel system...
Supra TT Fuel pump(s) 2 $140 shipped each
Ebay Engine torque damper painted black $50
Thermostat housing with AST delete $50
Throttle body $65
LIM $50
Gotham racing Short shifter $145
BDC ported half bridge REW $2000
Gotham racing polyurathane motor mounts $100

ProjectD · 07-01-2009, 08:15 AM

ProjectD · 07-01-2009, 08:16 AM

ProjectD · 07-01-2009, 08:18 AM

***ZGN*** · 07-01-2009, 08:36 AM

I am interested in the FMIC can you post photos of it?

How many miles... track/dragstrip events on the transmission?

ProjectD · 07-01-2009, 08:54 AM

I'll go get some pix of the FMIC now, transmission was rebuilt before I bought the car and I have put about 30-40k miles on it, about 8 trips down the drag strip (never power shifted) and no track days. I've used royal purple synthetic fluid as long as i've had it

ProjectD · 07-01-2009, 09:30 AM

ProjectD · 07-02-2009, 12:24 PM

ProjectD · 07-03-2009, 11:34 AM

Polished UIM $150
Greddy 2 row FMIC w/ HKS SSQ BOV $700
Defi mechanical Boost gauge $130
HKS EVC IV electronic boost controller $150
Single turbo engine harness with FJO injector driver (low miles) $400
NEW air intake temp sensor $40
Bosch 1680cc injectors cleaned and flow tested (5) $ 65each
Lucas/RC 120lb injectors (1 pair) $80
Fluidyne Radiator w/ stock fan setup $275
FC leading ignition coil (3) $40 each
5 speed tranny no grinds $300
Supra TT Fuel pump(s) 2 $140 shipped (each)
Big Boy fuel setup (black anodized top feed rails, sard FPR w/gauge and mounting bracket w/ harware. 2 edlebrock 40 micron stainless replaceable stainless steel fuel filters, All lines and fittings required for install. hose is black nylon with SS reinforced braid. This fuel setup will handle whatever you wanna run though it from pumpgas to race gas and even E85. $500 (i'll even throw in a pair of1680cc injectors
Also willing to part out the fuel system...
Ebay Engine torque damper painted black $50 needs respayed
Thermostat housing with AST delete $50
Throttle body $65
LIM $50
Gotham racing Short shifter $145
BDC ported half bridge REW $2000
Gotham racing polyurathane motor mounts $100
Aspec GT3574 turbo .96 A/R Deposit Received Pending
Tial 46mm WG Deposit Received Pending
Ported rx7store single turbo manifold with tial 46mm wg flange Deposit Received Pending
Down pipe for single setup Deposit Received Pending

ProjectD · 07-03-2009, 04:05 PM

Single turbo engine harness with FJO injector driver (low miles) SOLD
Fluidyne w/ stock fan setup SOLD

ProjectD · 07-05-2009, 03:00 AM

Big boy foy fuel system and one pair of 1680cc injectors SOLD
Still have 3 1680cc injectors left, as well as 201200cc

ProjectD · 07-07-2009, 08:34 AM

Polished UIM $150
Greddy 2 row FMIC w/ HKS SSQ BOV $700
Defi mechanical Boost gauge $130
HKS EVC IV electronic boost controller $150
NEW air intake temp sensor $40
Bosch 1680cc injectors cleaned and flow tested (3) $65 each
Lucas/RC 120lb injectors (1 pair) $80
FC leading ignition coil (3) $40 each
5 speed tranny no grinds $300
Supra TT Fuel pump(s) 2 $140 shipped (each)
Ebay Engine torque damper painted black $50 needs respayed
Thermostat housing with AST delete $50
Thermostat housing Regular $40
Throttle body with TPS $65
LIM $50
Gotham racing Short shifter $145
BDC ported half bridge REW $2000
Aspec GT3574 turbo .96 A/R Deposit Received Pending
Tial 46mm WG Deposit Received Pending
Ported rx7store single turbo manifold with tial 46mm wg flange Deposit Received Pending
Down pipe for single setup Deposit Received Pending
FD trailing Coils about 15k miles on them $55 each
Midpipe $150
Greddy PE catback $300
Driveshaft $100
PPF $100
Fuse block with batter cable $65
Engine pressure tester $30
Pineable exhaust porting template $20 shipped

If you see something you like Make me a offer. Some prices are OBO!

06-30-2009, 08:23 AM	#1
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	Parting out engine and trans LOTs of aftermarket and stock parts! Polished UIM $150 Greddy 2 row FMIC w/ HKS SSQ BOV $900 Defi mechanical Boost gauge $130 HKS EVC IV electronic boost controller $150 Single turbo engine harness with FJO injector driver (low miles) $500 Aspec GT3574 turbo .96 A/R $600 Tial 46mm WG $300 Ported rx7store singleturbo manifold with tial 46mm wg flange $150 NEW air intake temp sensor $40 Bosch 1680cc injectors cleaned and flow tested (5) $ 70 each Lucas/RC 120lb injectors (1 pair) $90 Fluidyne Radiator w/ stock fan setup $350 FC leading ignition coil (3) $50 each 5 speed tranny w/ gotham short shifter no grinds $400 Supra TT Fuel pump(s) 2 $140 shipped (each) Big Boy fuel setup (black anodized top feed rails, sard FPR w/gauge and mounting bracket w/ harware. 2 edlebrock 40 micron stainless replaceable stainless steel fuel filters, All lines and fittings required for install. hose is black nylon with SS reinforced braid. This fuel setup will handle whatever you wanna run though it from pumpgas to race gas and even E85. $590 Supra TT Fuel pump(s) 2 $140 shipped Still have more things to list so check back __________________

06-30-2009, 11:51 PM	#2
Rotary Inspired Rotary Fan in Training Join Date: Feb 2008 Location: SW OKC iTrader: (0) Posts: 75 Rep Power: 17	Cyan what are you doing with the car LS1? Interested in your turbo __________________ If you wanna become ASE certified buy the RX7.

07-01-2009, 08:14 AM	#4
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	Polished UIM $150 Greddy 2 row FMIC w/ HKS SSQ BOV $700 Defi mechanical Boost gauge $130 HKS EVC IV electronic boost controller $150 Single turbo engine harness with FJO injector driver (low miles) $400 Aspec GT3574 turbo .96 A/R $550 Tial 46mm WG $250 Ported rx7store single turbo manifold with tial 46mm wg flange $150 NEW air intake temp sensor $40 Bosch 1680cc injectors cleaned and flow tested (5) $ 65each Lucas/RC 120lb injectors (1 pair) $80 Fluidyne Radiator w/ stock fan setup $275 FC leading ignition coil (3) $40 each 5 speed tranny no grinds $300 Supra TT Fuel pump(s) 2 $140 shipped (each) Big Boy fuel setup (black anodized top feed rails, sard FPR w/gauge and mounting bracket w/ harware. 2 edlebrock 40 micron stainless replaceable stainless steel fuel filters, All lines and fittings required for install. hose is black nylon with SS reinforced braid. This fuel setup will handle whatever you wanna run though it from pumpgas to race gas and even E85. $500 (i'll even throw in a pair of1680cc injectors Also willing to part out the fuel system... Supra TT Fuel pump(s) 2 $140 shipped each Ebay Engine torque damper painted black $50 Thermostat housing with AST delete $50 Throttle body $65 LIM $50 Gotham racing Short shifter $145 BDC ported half bridge REW $2000 Gotham racing polyurathane motor mounts $100 __________________

07-01-2009, 08:15 AM	#5
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	__________________

07-01-2009, 08:16 AM	#6
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	__________________

07-01-2009, 08:18 AM	#7
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	__________________

07-01-2009, 08:36 AM	#8
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	I am interested in the FMIC can you post photos of it? How many miles... track/dragstrip events on the transmission? __________________ Kevin Last edited by ZGN; 07-01-2009 at 08:38 AM..

07-01-2009, 08:54 AM	#9
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	I'll go get some pix of the FMIC now, transmission was rebuilt before I bought the car and I have put about 30-40k miles on it, about 8 trips down the drag strip (never power shifted) and no track days. I've used royal purple synthetic fluid as long as i've had it Last edited by ProjectD; 07-01-2009 at 09:22 AM..

07-01-2009, 09:30 AM	#10
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17

07-02-2009, 12:24 PM	#11
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	New pix: Fluidyne and Ebay torque brace

07-03-2009, 11:34 AM	#12
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	Update! Polished UIM $150 Greddy 2 row FMIC w/ HKS SSQ BOV $700 Defi mechanical Boost gauge $130 HKS EVC IV electronic boost controller $150 Single turbo engine harness with FJO injector driver (low miles) $400 NEW air intake temp sensor $40 Bosch 1680cc injectors cleaned and flow tested (5) $ 65each Lucas/RC 120lb injectors (1 pair) $80 Fluidyne Radiator w/ stock fan setup $275 FC leading ignition coil (3) $40 each 5 speed tranny no grinds $300 Supra TT Fuel pump(s) 2 $140 shipped (each) Big Boy fuel setup (black anodized top feed rails, sard FPR w/gauge and mounting bracket w/ harware. 2 edlebrock 40 micron stainless replaceable stainless steel fuel filters, All lines and fittings required for install. hose is black nylon with SS reinforced braid. This fuel setup will handle whatever you wanna run though it from pumpgas to race gas and even E85. $500 (i'll even throw in a pair of1680cc injectors Also willing to part out the fuel system... Ebay Engine torque damper painted black $50 needs respayed Thermostat housing with AST delete $50 Throttle body $65 LIM $50 Gotham racing Short shifter $145 BDC ported half bridge REW $2000 Gotham racing polyurathane motor mounts $100 Aspec GT3574 turbo .96 A/R Deposit Received Pending Tial 46mm WG Deposit Received Pending Ported rx7store single turbo manifold with tial 46mm wg flange Deposit Received Pending Down pipe for single setup Deposit Received Pending

07-03-2009, 04:05 PM	#13
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	Single turbo engine harness with FJO injector driver (low miles) SOLD Fluidyne w/ stock fan setup SOLD __________________

07-05-2009, 03:00 AM	#14
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	Big boy foy fuel system and one pair of 1680cc injectors SOLD Still have 3 1680cc injectors left, as well as 201200cc

07-07-2009, 08:34 AM	#15
ProjectD Rotary Fan in Training Join Date: Feb 2008 iTrader: (2) Posts: 70 Rep Power: 17	Polished UIM $150 Greddy 2 row FMIC w/ HKS SSQ BOV $700 Defi mechanical Boost gauge $130 HKS EVC IV electronic boost controller $150 NEW air intake temp sensor $40 Bosch 1680cc injectors cleaned and flow tested (3) $65 each Lucas/RC 120lb injectors (1 pair) $80 FC leading ignition coil (3) $40 each 5 speed tranny no grinds $300 Supra TT Fuel pump(s) 2 $140 shipped (each) Ebay Engine torque damper painted black $50 needs respayed Thermostat housing with AST delete $50 Thermostat housing Regular $40 Throttle body with TPS $65 LIM $50 Gotham racing Short shifter $145 BDC ported half bridge REW $2000 Aspec GT3574 turbo .96 A/R Deposit Received Pending Tial 46mm WG Deposit Received Pending Ported rx7store single turbo manifold with tial 46mm wg flange Deposit Received Pending Down pipe for single setup Deposit Received Pending FD trailing Coils about 15k miles on them $55 each Midpipe $150 Greddy PE catback $300 Driveshaft $100 PPF $100 Fuse block with batter cable $65 Engine pressure tester $30 Pineable exhaust porting template $20 shipped If you see something you like Make me a offer. Some prices are OBO!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode