.Want to wire FD TPS onto the FC wiring.(how?).

misterstyx69 · 06-06-2009, 09:23 PM

I am "attempting" to put an FD upper on my FC TII and I need to know How to Wire the FD TPS onto the Harness.I have the TPS Connector.
another quick Question: I am running RTEK 2.1. Can I run the FD TPS with an RTEK?.or should I just Say Frigg It,and Put on the TII upper and wait until I get a Haltech?Thanks Gents.STYX.

TehMonkay · 06-07-2009, 03:23 PM

FC ecu does not use a full range tps for anything other than MOP operation on the S5, and the TPS on the fd is full range. I'd guess you're not going to have alot of luck with it though it MIGHT work if the ohm range is the same between the two which you could test for with a DMM or check in the FSM.

As for wiring, you'll need to look that up in the fsm as well. Just match up the wires, one is +5v, one is ground, one is for the sensor output.

antman0408 · 06-07-2009, 06:06 PM

I thought the fd tps had both a full range and narrow range, so it could be wired on both the s4 and s5. I think this is way to wire it on an s4

FD tps S4 harness
ground - black/brown ---- brown/black
narrow tps- green/red ------ green/red
5 volt ref. - brown/white ---- brown/white
tps - black/green ----- not used

misterstyx69 · 06-07-2009, 06:58 PM

Thanks Tony..I'll meter that out and see what I get.I just got the Stuff together(parts wise,not assembled).I don't want to put it on Unless it is Runnable with what I got.Otherwise it becomes this Winter's Project!.I am making my OLD N/A engine into a TII engine,and I think that is gonna have the FD upper on it..maybe have a T4 Turbo too!..haha..Should be Quite the engine(for about 10 minutes!).Cheers Lads.Keep the info Coming..
ARGHX where are you?(info!)..Cheers,STYX!

sen2two · 06-27-2009, 02:30 AM

i wired my my S5 tps to the FD tps. i have the FD upper on my FC. i cant remember wich goes where. but i could check tomorrow and let you know. its pretty easy though.

06-06-2009, 09:23 PM	#1
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario iTrader: (5) Posts: 198 Rep Power: 17	.Want to wire FD TPS onto the FC wiring.(how?). I am "attempting" to put an FD upper on my FC TII and I need to know How to Wire the FD TPS onto the Harness.I have the TPS Connector. another quick Question: I am running RTEK 2.1. Can I run the FD TPS with an RTEK?.or should I just Say Frigg It,and Put on the TII upper and wait until I get a Haltech?Thanks Gents.STYX.

06-07-2009, 03:23 PM	#2
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY iTrader: (0) Posts: 302 Rep Power: 17	FC ecu does not use a full range tps for anything other than MOP operation on the S5, and the TPS on the fd is full range. I'd guess you're not going to have alot of luck with it though it MIGHT work if the ohm range is the same between the two which you could test for with a DMM or check in the FSM. As for wiring, you'll need to look that up in the fsm as well. Just match up the wires, one is +5v, one is ground, one is for the sensor output. __________________ My car blows up everytime I start it, it's rotary

06-27-2009, 02:30 AM	#5
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	i wired my my S5 tps to the FD tps. i have the FD upper on my FC. i cant remember wich goes where. but i could check tomorrow and let you know. its pretty easy though. __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-07-2009, 06:06 PM	#3
antman0408 Rotary Fan in Training Join Date: Jan 2009 iTrader: (1) Posts: 61 Rep Power: 16	I thought the fd tps had both a full range and narrow range, so it could be wired on both the s4 and s5. I think this is way to wire it on an s4 FD tps S4 harness ground - black/brown ---- brown/black narrow tps- green/red ------ green/red 5 volt ref. - brown/white ---- brown/white tps - black/green ----- not used

06-07-2009, 06:58 PM	#4
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario iTrader: (5) Posts: 198 Rep Power: 17	Thanks Tony..I'll meter that out and see what I get.I just got the Stuff together(parts wise,not assembled).I don't want to put it on Unless it is Runnable with what I got.Otherwise it becomes this Winter's Project!.I am making my OLD N/A engine into a TII engine,and I think that is gonna have the FD upper on it..maybe have a T4 Turbo too!..haha..Should be Quite the engine(for about 10 minutes!).Cheers Lads.Keep the info Coming.. ARGHX where are you?(info!)..Cheers,STYX!