Ignition re-wire...shielded wires?

Mobius · 06-16-2009, 06:37 PM

The metal sleeving may work as shielding, as long as you somehow made provisions to ground the sleeving (which is the key to proper shielding.)

You could also look more into this product:

http://www.acsindustries.com/product...e/default.html

Or best (and easiest) option: Get yourself some shielded 3 wire Belden Cable from your local or nearest electrical wholesaler (or online). Then you don't have to wrap anything.

06-16-2009, 06:37 PM	#2
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta Posts: 164 Rep Power: 18	The metal sleeving may work as shielding, as long as you somehow made provisions to ground the sleeving (which is the key to proper shielding.) You could also look more into this product: http://www.acsindustries.com/product...e/default.html Or best (and easiest) option: Get yourself some shielded 3 wire Belden Cable from your local or nearest electrical wholesaler (or online). Then you don't have to wrap anything. __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode