|
RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
|
Thread Tools | Display Modes |
03-31-2009, 09:11 PM | #1 |
Respecognize!
|
picture of main relay in an 82?
anyone have a picture of the main relay in a 1982. The haynes isnt the best and i dont have an FSM that covers 81-83. Can't quite figure out if its either or both of the two black relays or the larger gold anodized one that says "check"
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
03-31-2009, 09:25 PM | #2 |
Rotary Fan in Training
|
Im not sure there is one. IIRC the check relay is for emissions and choke stuff.
__________________
www.pbandjracing.com |
03-31-2009, 09:33 PM | #3 |
Respecognize!
|
i was thinking that it was, but i was also thinking there HAD to be a main relay. i guess that just might not be the case. What would the two black plastic relays be then? A/C?
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
04-01-2009, 10:41 AM | #5 |
Rotary since 1972
|
There is no main relay. The four on the fender are[ Hot start assist outboard forward;#2 AC outboard aft;Choke/Check inboard aft;#1 AC inboard forward. At least that is their config coming out of the factory. ref 9999-95-016G-82
|
04-03-2009, 03:58 PM | #6 |
Respecognize!
|
hmm...well that solves one issue but raises another for the megasquirt install
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |