sTOCK hp

Chadwick · 03-16-2009, 09:10 PM

I would get 15 B.S. posts if I put this on the other forum; the reason for the good numbers are the 99 turbo's and a good tune. The abraded seals make them 10-15% more efficient at the same boost level. I can only guess that at some point some respected person on the other forum posted that the seals didn’t do anything and everyone jumped on the bandwagon, but I can tell you from experience that they do make a difference. I put down 315 rwhp at 10 psi, but my engine also has 9.7:1 compression rotors.

Dan

03-16-2009, 09:10 PM	#10
Chadwick Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN, USA Posts: 239 Rep Power: 18	I would get 15 B.S. posts if I put this on the other forum; the reason for the good numbers are the 99 turbo's and a good tune. The abraded seals make them 10-15% more efficient at the same boost level. I can only guess that at some point some respected person on the other forum posted that the seals didn’t do anything and everyone jumped on the bandwagon, but I can tell you from experience that they do make a difference. I put down 315 rwhp at 10 psi, but my engine also has 9.7:1 compression rotors. Dan __________________ 93 RX7 BB (Race Car) 93 RX7 SSM (Soon to be IBM and a daily driver) 05 Silverado Z71 08 Mini Cooper 80 LS RX7 (for sale)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode