Bushings!

Charlie Redden · 03-14-2009, 02:39 PM

I have done both the pillow balls and diff bushings and I agree that a press makes the job much easier. Neither job is too difficult although I had some issue getting my diff bushings carrier off (hard to get leverage on the 17mm bolts on top). I replaced my diff bushings with the Superpros (a couple of years ago) and I have been very happy. No drive train noise transmitted to the cabin.

I sourced my OEM pillow balls, and dust covers, from Ray at Malloy 888.533.3400. His number should be in your speed dial for all OEM parts.

Good luck.

03-14-2009, 02:39 PM	#4
Charlie Redden 17+ years... Join Date: Feb 2008 Location: Oahu Posts: 59 Rep Power: 18	I have done both the pillow balls and diff bushings and I agree that a press makes the job much easier. Neither job is too difficult although I had some issue getting my diff bushings carrier off (hard to get leverage on the 17mm bolts on top). I replaced my diff bushings with the Superpros (a couple of years ago) and I have been very happy. No drive train noise transmitted to the cabin. I sourced my OEM pillow balls, and dust covers, from Ray at Malloy 888.533.3400. His number should be in your speed dial for all OEM parts. Good luck. __________________ Charlie

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode