Bushings!

MotoTek · 03-13-2009, 05:00 PM

I went with Delrin bushings, still sitting in a box somewhere around here. I have heard that the superpro give a little less vibration, but I don't hear many people complaining about the Delrin.

You don't need a press, but it will make life easier. I got a quote from a local machine shop to push all the bushings in for $75.

PillowBall DIY Thread:
http://www.maxcooper.com/rx7/how-to/...lls/index.html

JimLab has a nice write up as well. Maybe someone will post it for you.

~M~

03-13-2009, 05:00 PM	#1
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA Posts: 302 Rep Power: 18	I went with Delrin bushings, still sitting in a box somewhere around here. I have heard that the superpro give a little less vibration, but I don't hear many people complaining about the Delrin. You don't need a press, but it will make life easier. I got a quote from a local machine shop to push all the bushings in for $75. PillowBall DIY Thread: http://www.maxcooper.com/rx7/how-to/...lls/index.html JimLab has a nice write up as well. Maybe someone will post it for you. ~M~ __________________ BLACKADDE™ \| ADGT RX7 \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode