can i use 16'' wheels from a s2000 honda???

WhiteRice_7 · 02-27-2009, 02:37 AM

im thinking of buying a set of offset wheels that were used on a honda s2000.thier 16x7 fronts and 16x8 rears,but the offset isnot known....

SPICcnmFD · 02-27-2009, 08:49 AM

I'm assuming on an FD?? What are the offsets?? Bolt pattern??

rotorhead87 · 02-27-2009, 08:49 AM

I believe the original offset for the +55mm for the 7'' and a 65+mm for the 8'' with those offsets the anwser is NO. It would end up sitting into the wheel well too deep. I recommend you find a wheel with the offsets between +30 to +35 to have a flush to the fender look. Oh btw this is based on a FC right?

Someone correct me if I'm wrong.

***Herblenny*** · 02-27-2009, 09:21 AM

Quote:

Originally Posted by WhiteRice_7

im thinking of buying a set of offset wheels that were used on a honda s2000.thier 16x7 fronts and 16x8 rears,but the offset isnot known....

So, you just want to know about the offset of S2k wheels??

The OEM MY00-03 (AP1) wheel sizes and offsets are as follows:

Front:
16" x 6.5", +55 offset, 205 tire
Rear:
16" x 7.5", +65 offset, 225 tire

Max777 · 03-10-2009, 04:09 PM

Wow, +55 offset on an FR? Why is it so high on the S2000, I thought that most FR's had lower offset, and that the FF cars need high offset to stuff more brake/suspension in between the two wheels? I had no idea that some FR cars run 55, lol.

Mobius · 03-10-2009, 06:19 PM

^^^ An FD is +50 all the way around....

WhiteRice_7 · 03-11-2009, 12:31 AM

Quote:

Originally Posted by WhiteRice_7

im thinking of buying a set of offset wheels that were used on a honda s2000.thier 16x7 fronts and 16x8 rears,but the offset isnot known....

sorry all.was gonna try them on a FC....good info tho guys.thanks.

02-27-2009, 02:37 AM	#1
WhiteRice_7 Rotary Fan in Training Join Date: Oct 2008 iTrader: (0) Posts: 46 Rep Power: 0	can i use 16'' wheels from a s2000 honda??? im thinking of buying a set of offset wheels that were used on a honda s2000.thier 16x7 fronts and 16x8 rears,but the offset isnot known....

02-27-2009, 08:49 AM	#2
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	I'm assuming on an FD?? What are the offsets?? Bolt pattern?? __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

02-27-2009, 08:49 AM	#3
rotorhead87 Rotors > Pistons Join Date: Sep 2008 Location: Port Saint Lucie, Florida iTrader: (0) Posts: 316 Rep Power: 17	I believe the original offset for the +55mm for the 7'' and a 65+mm for the 8'' with those offsets the anwser is NO. It would end up sitting into the wheel well too deep. I recommend you find a wheel with the offsets between +30 to +35 to have a flush to the fender look. Oh btw this is based on a FC right? Someone correct me if I'm wrong. __________________ *UPDATED 06/15/2009* Check out My VMIC Turbo 13B-RE FC3S build

03-10-2009, 04:09 PM	#5
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	Wow, +55 offset on an FR? Why is it so high on the S2000, I thought that most FR's had lower offset, and that the FF cars need high offset to stuff more brake/suspension in between the two wheels? I had no idea that some FR cars run 55, lol. __________________ Rotaries:They are NOT that complicated!

03-10-2009, 06:19 PM	#6
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta iTrader: (1) Posts: 164 Rep Power: 17	^^^ An FD is +50 all the way around.... __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode