hav u had 13b nt cut out at 4000 rpm

lcrotaryracer · 10-25-2008, 12:06 AM

i have a 87 nt 13b that cuts out spits at 4grand but sitting still i let out of the gas for a second and puch it , it will go up some but its a prosess to get to 7

if u know how to make my rx7 run better please tell me how

10-25-2008, 05:23 AM

Possible TPS needs adjustment look under "3800 RPM hesitation"

I would also do the following if u have not recently:

spark plugs (OEM NGK)
plug wires (OEM NGK)
fuel filter

Could be bad secondary injectors.

Let us know.

lcrotaryracer · 10-25-2008, 11:13 AM

thanks for the addvice new plugs are in fuel filter going in

Mobius · 10-25-2008, 12:41 PM

Make double sure that your plug wires are working and that they are in the correct order. T1 is the top (trailing) plug on the front rotor (closest to the front of the car). L1 is the bottom (leading) plug on the front rotor, and vice versa.

I know a couple of people who have made this mistake, one guy even went as far as buying a spark amplifier before the problem was realized.

lcrotaryracer · 10-25-2008, 09:46 PM

iam getting good fire and good power. wires are right . i mean very good power to 4000 rpm the car has 142000 miles and looks like the engine has been replaced or rebuilt

Ender · 02-24-2009, 11:59 PM

Did you ever get anywhere with this? I seem to remember some people having trouble with the secondary injectors firing because of either not having the injector resistors when they needed them or having them when they didn't need them. I believe it has something to do with the year of the ECU as to whether you need the resistor pack or not.

FerociousP · 02-25-2009, 12:40 PM

I regrounded a wire going to the ECU (#10 something maybe?) and it fixed my 3800 hesitation in my 87. Did it at the ECU to one of its mounting bolts. Grounding the same wire at the block didn't work. someone has a write-up.

Phoenix7 · 02-25-2009, 12:55 PM

Also check the auxilary (5th and 6th) ports to make sure they're opening.

10-25-2008, 12:41 PM	#4
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta Posts: 164 Rep Power: 18	Make double sure that your plug wires are working and that they are in the correct order. T1 is the top (trailing) plug on the front rotor (closest to the front of the car). L1 is the bottom (leading) plug on the front rotor, and vice versa. I know a couple of people who have made this mistake, one guy even went as far as buying a spark amplifier before the problem was realized. __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

02-25-2009, 12:40 PM	#7
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	I regrounded a wire going to the ECU (#10 something maybe?) and it fixed my 3800 hesitation in my 87. Did it at the ECU to one of its mounting bolts. Grounding the same wire at the block didn't work. someone has a write-up. __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-25-2008, 12:06 AM	#1
lcrotaryracer Rotary Fan in Training Join Date: Oct 2008 Location: lenoir city, TN Posts: 63 Rep Power: 17	hav u had 13b nt cut out at 4000 rpm i have a 87 nt 13b that cuts out spits at 4grand but sitting still i let out of the gas for a second and puch it , it will go up some but its a prosess to get to 7 if u know how to make my rx7 run better please tell me how

10-25-2008, 05:23 AM	#2
SpooledupRacing Guest Posts: n/a	Possible TPS needs adjustment look under "3800 RPM hesitation" I would also do the following if u have not recently: spark plugs (OEM NGK) plug wires (OEM NGK) fuel filter Could be bad secondary injectors. Let us know.

10-25-2008, 11:13 AM	#3
lcrotaryracer Rotary Fan in Training Join Date: Oct 2008 Location: lenoir city, TN Posts: 63 Rep Power: 17	thanks for the addvice new plugs are in fuel filter going in

10-25-2008, 09:46 PM	#5
lcrotaryracer Rotary Fan in Training Join Date: Oct 2008 Location: lenoir city, TN Posts: 63 Rep Power: 17	iam getting good fire and good power. wires are right . i mean very good power to 4000 rpm the car has 142000 miles and looks like the engine has been replaced or rebuilt