need some help

TehMonkay · 02-17-2009, 09:10 PM

he needs an s4 airbox or a cone filter and adapter, most advances and autozones have them

the first picture is where the aws solenoid would go, you do not want that on your car, it's useless, makes you car rev to 3k on startup

Cap the nipple on the manifold, and run a rubber hose from the metal one directly to the fitting on the bac valve.

Also make sure the hose is connected to the intake boot on the other side of the metal pipe.

02-17-2009, 09:10 PM	#7
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY Posts: 302 Rep Power: 18	he needs an s4 airbox or a cone filter and adapter, most advances and autozones have them the first picture is where the aws solenoid would go, you do not want that on your car, it's useless, makes you car rev to 3k on startup Cap the nipple on the manifold, and run a rubber hose from the metal one directly to the fitting on the bac valve. Also make sure the hose is connected to the intake boot on the other side of the metal pipe. __________________ My car blows up everytime I start it, it's rotary

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode