Dashboard cluster modification (w/ pics)

Skatelement · 01-14-2009, 04:41 AM

Here is A link with some pinout info on the pannel connection if you need to pin A S5 pannel to fit the S4.
http://www.rotaryresurrection.com/2n...o_s5_swap.html
Rotaryresurrection page has alot of helpful info and tips listed. Spend some time and just read it all, It explains alot.

WE3RX7 · 01-14-2009, 05:09 PM

Not sure. I have a S5 NA cluster in my S4 NA, the only thing that didnt work right was the speedo, but that wasnt the cluster's issue... it was the speedo cable.

firzen · 01-14-2009, 07:50 PM

Since there's activity in this thread again, I might as well provide an update:

Turns out there was something wrong with the one water temperature gauge- I tried all combinations of it with another gauge and the two dash clusters I had. In all cases it was the only weak link so I ended up not using that one.

The tachometer was also fine too. Turns out my throttle cable was a bit stuck too and made me think otherwise.

Fortunately, I'm not dealing with the S4/S5 gauge swaps.

01-14-2009, 04:41 AM	#16
Skatelement Senior Member Join Date: May 2008 iTrader: (0) Posts: 13 Rep Power: 0	Gauges Here is A link with some pinout info on the pannel connection if you need to pin A S5 pannel to fit the S4. http://www.rotaryresurrection.com/2n...o_s5_swap.html Rotaryresurrection page has alot of helpful info and tips listed. Spend some time and just read it all, It explains alot.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-14-2009, 05:09 PM	#17
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Not sure. I have a S5 NA cluster in my S4 NA, the only thing that didnt work right was the speedo, but that wasnt the cluster's issue... it was the speedo cable.

01-14-2009, 07:50 PM	#18
firzen Rotary Fanatic Join Date: Mar 2008 iTrader: (2) Posts: 231 Rep Power: 17	Since there's activity in this thread again, I might as well provide an update: Turns out there was something wrong with the one water temperature gauge- I tried all combinations of it with another gauge and the two dash clusters I had. In all cases it was the only weak link so I ended up not using that one. The tachometer was also fine too. Turns out my throttle cable was a bit stuck too and made me think otherwise. Fortunately, I'm not dealing with the S4/S5 gauge swaps.