|
|
|
||||||||
| Carburetors and Carb Tuning.. All info about old school carb set ups.. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
|
||||||||
| Carburetors and Carb Tuning.. All info about old school carb set ups.. |
|
|
|
Thread Tools | Display Modes |
12-08-2008, 01:52 PM
|
#16 |
|
Rotary Fanatic
|
I never got a response from holley but I figured out the problem. There is a secondary throttle adjustment screw on the underside of the baseplate below the vacuum secondary diaphram. To adjust it needed a very small flat head screwdriver. I lowered the idle until it stopped going down and then I raised it back up a half turn.
|
|
|
Linear Mode
