Help me upgrade clutches in my REPU, rotary GLC and FB

Jeff20B · 11-17-2008, 01:52 PM

I can post pics of the GLC later. Turns out I have a fresh rebuilt 13B here already that needs to be broken-in in something. What better vehicle than the GLC, eh? This will give me a chance to test the 215mm disc because there are some questions about the springs in the sprung center. The disc material is like-new at 8.3mm thick (uncompressed) so it has tons of life left. Then after the engine is finished breaking in, I can pull it and check on the springs to see whether they loosened up or whatever.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11-17-2008, 01:52 PM	#11
Jeff20B Rotary Fanatic Join Date: Mar 2008 Posts: 215 Rep Power: 18	I can post pics of the GLC later. Turns out I have a fresh rebuilt 13B here already that needs to be broken-in in something. What better vehicle than the GLC, eh? This will give me a chance to test the 215mm disc because there are some questions about the springs in the sprung center. The disc material is like-new at 8.3mm thick (uncompressed) so it has tons of life left. Then after the engine is finished breaking in, I can pull it and check on the springs to see whether they loosened up or whatever.