Infini leg rest pads?

Whizbang · 10-07-2008, 10:22 PM

the mounting for the door panel one will require the drilling of your door card to accept the mounting studs. The first versions will be for cars with the "pockets" on the doors. I may produce another version for those without.

10-08-2008, 05:24 AM

Ill have to check but being a base I don't think I have any "pockets"

Whizbang · 10-08-2008, 08:26 AM

ill look at the junkyard for a door car without the pocket. The foam will have to be thicker BUT the pad will be larger which i see as a benefiet.

Flooder · 10-08-2008, 06:35 PM

Yah, I have a GTUs and it doesn't have the map pockets on the door panels.

Whizbang · 10-08-2008, 07:05 PM

hmm well maybe ill do the non map pocket door first

Whizbang · 10-09-2008, 11:28 PM

if ANYONE knows of a picture of the back side of the pad, i would greatly appreciate it

Whizbang · 10-11-2008, 02:24 AM

i acquired a non map pocket door card with the crank windows. I am hoping to see if i can make this work with the crank windows as well as power.

10-11-2008, 05:09 AM

Oh Oh Oh ... Saweet

Whizbang · 10-13-2008, 04:49 PM

the prototype for the map pocket model is done. The center console prototype pad is also done and are being tested in my car. Once i am satisfied ill start making the first prototype in the actual materials.

And the crank window, non map pocket seems like it might be working out as well!

My driving impressions with just the real rough rough model i seem to like it. I am going off my own thickness, firmness, size and contact area. Plus i ensured that even my 5'1" fiancee with the seat almost all the way up can still sit without the seat hitting the pad.

And with my 6'1" self, it should cover a good spread of people!

RotaryXperiment · 10-13-2008, 04:51 PM

oo0o0o. care to show some pics

Whizbang · 10-13-2008, 04:55 PM

ill be posting pictures of the prototypes made from the materials im using. The current ones are a constant cut and refit mess since i have been making small changes.

RotaryXperiment · 10-13-2008, 07:00 PM

ah ok cool

Whizbang · 10-18-2008, 12:57 AM

for futher updates, go here:

http://rotarycarclub.com/showthread....2936#post52936

10-07-2008, 10:22 PM	#16
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	the mounting for the door panel one will require the drilling of your door card to accept the mounting studs. The first versions will be for cars with the "pockets" on the doors. I may produce another version for those without. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-08-2008, 08:26 AM	#18
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	ill look at the junkyard for a door car without the pocket. The foam will have to be thicker BUT the pad will be larger which i see as a benefiet. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-08-2008, 06:35 PM	#19
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	Yah, I have a GTUs and it doesn't have the map pockets on the door panels. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

10-08-2008, 07:05 PM	#20
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	hmm well maybe ill do the non map pocket door first __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-09-2008, 11:28 PM	#21
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	if ANYONE knows of a picture of the back side of the pad, i would greatly appreciate it __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-08-2008, 05:24 AM	#17
SpooledupRacing Guest Posts: n/a	Ill have to check but being a base I don't think I have any "pockets"

10-11-2008, 02:24 AM	#22
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	i acquired a non map pocket door card with the crank windows. I am hoping to see if i can make this work with the crank windows as well as power. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-11-2008, 05:09 AM	#23
SpooledupRacing Guest Posts: n/a	Oh Oh Oh ... Saweet

10-13-2008, 04:49 PM	#24
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	the prototype for the map pocket model is done. The center console prototype pad is also done and are being tested in my car. Once i am satisfied ill start making the first prototype in the actual materials. And the crank window, non map pocket seems like it might be working out as well! My driving impressions with just the real rough rough model i seem to like it. I am going off my own thickness, firmness, size and contact area. Plus i ensured that even my 5'1" fiancee with the seat almost all the way up can still sit without the seat hitting the pad. And with my 6'1" self, it should cover a good spread of people! __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-13-2008, 04:51 PM	#25
RotaryXperiment Rotary Fanatic Join Date: Mar 2008 Location: Bradenton, Fl iTrader: (0) Posts: 136 Rep Power: 17	oo0o0o. care to show some pics

10-13-2008, 04:55 PM	#26
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	ill be posting pictures of the prototypes made from the materials im using. The current ones are a constant cut and refit mess since i have been making small changes. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-13-2008, 07:00 PM	#27
RotaryXperiment Rotary Fanatic Join Date: Mar 2008 Location: Bradenton, Fl iTrader: (0) Posts: 136 Rep Power: 17	ah ok cool

10-18-2008, 12:57 AM	#28
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	for futher updates, go here: http://rotarycarclub.com/showthread....2936#post52936 __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode