WTB: This odd part

ranchan02 · 10-03-2008, 09:54 AM

As the title states, I'm looking for the piece below circled in red.

It's a screw that sits in the front of the throttle body, behind the throttle cable. Let me know if any of you have one for sale. Thanks!

Brent · 10-03-2008, 10:11 AM

Call Ray Crowe at Malloy Mazda. It shouldn't be more than a few dollars I wouldn't think. I have seen many FD's with the broken idle screw here lately.

ranchan02 · 10-03-2008, 12:17 PM

Did that already before posting this on the board. Ray said that piece is part of a set of screws for the TB (not sold individually) and the part was around $200+.

Quote:

Originally Posted by Brent

Call Ray Crowe at Malloy Mazda. It shouldn't be more than a few dollars I wouldn't think. I have seen many FD's with the broken idle screw here lately.

David Jerome · 10-03-2008, 12:25 PM

Go to home depot or lowes and find a bolt that works. It doesnt need to be the exact part from mazda. Should be an 8mm headed bolt that will take care of it, I forget the thread pitch though.

10-03-2008, 01:15 PM

yeah I might have one off an FC tb that may work but I would just do that Dave said and go to the hardware store

ranchan02 · 10-03-2008, 02:17 PM

Yeah I tried going thru the Home Depot direction but the problem is the pitch thread is pretty fine (.5 or .4) so I couldn't find a bolt/screw that is 8mm in that thread pitch.

C. Ludwig · 10-07-2008, 09:09 AM

The box stores suck for metric bolt selection. Try a good mom and pop hardware store. If all else fails find the diameter and pitch and try to find it at mcmaster.com. You might have to buy a qty of 10 at a time but it still won't be that expensive.

10-03-2008, 09:54 AM	#1
ranchan02 The Newbie Join Date: Feb 2008 Location: Chicago Posts: 16 Rep Power: 0	WTB: This odd part As the title states, I'm looking for the piece below circled in red. It's a screw that sits in the front of the throttle body, behind the throttle cable. Let me know if any of you have one for sale. Thanks! __________________ - 93 RX7 Auto (5-spd swap...Complete!) - 88 10th Anniversary RX7

10-03-2008, 10:11 AM	#2
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	Call Ray Crowe at Malloy Mazda. It shouldn't be more than a few dollars I wouldn't think. I have seen many FD's with the broken idle screw here lately. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

10-03-2008, 12:25 PM	#4
David Jerome RCC Contributor Join Date: Jan 2008 Posts: 713 Rep Power: 18	Go to home depot or lowes and find a bolt that works. It doesnt need to be the exact part from mazda. Should be an 8mm headed bolt that will take care of it, I forget the thread pitch though. __________________ David Jerome Broker for Speed For Sale LLC (David@SpeedForSale.com) (Pre-owned RX7/sports car sales & new parts sales/installs/tuning) PM me about low priced, high quality port work

10-03-2008, 02:17 PM	#6
ranchan02 The Newbie Join Date: Feb 2008 Location: Chicago Posts: 16 Rep Power: 0	Yeah I tried going thru the Home Depot direction but the problem is the pitch thread is pretty fine (.5 or .4) so I couldn't find a bolt/screw that is 8mm in that thread pitch. __________________ - 93 RX7 Auto (5-spd swap...Complete!) - 88 10th Anniversary RX7

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-03-2008, 01:15 PM	#5
SpooledupRacing Guest Posts: n/a	yeah I might have one off an FC tb that may work but I would just do that Dave said and go to the hardware store

10-07-2008, 09:09 AM	#7
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN Posts: 494 Rep Power: 17	The box stores suck for metric bolt selection. Try a good mom and pop hardware store. If all else fails find the diameter and pitch and try to find it at mcmaster.com. You might have to buy a qty of 10 at a time but it still won't be that expensive.