LEDs in my SA

[infernosg]

I need to do this for both the SA and the FC. So for the SA the breakdown is pretty much:

Interior:
194's for everything except the dome light (10+ white for everthing)
Festoon for the dome light (1 white)

Exterior:
Front side markers are 194's (2x white or amber)
Brake lights are 1157's (2x red)
Rear turn signals and reverse lights are 1156's (2x white and 2x amber)
Front turn signals/running lights are listed as 1157 but may not work due to polarity (2x amber)

Did I get that right? SuperBrightLEDs.com suggests 1157's for the front and rear turn signals, but they also include lights for rear side markers so who knows if their information is accurate. Either way, I probably won't be replacing the turn signals since the required resistor or electronic flasher loads up the circuit just as much as a regular incandescent bulb, which defeats the purpose of the LEDs, in my opinion.