Go Back   Rotary Car Club > Tech Discussion > Show your rotary car build up.

Show your rotary car build up. Show off your Rotary Car build!

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-01-2016, 09:49 AM   #4
infernosg
IT'S ALIVE!
 
infernosg's Avatar
 
Join Date: Dec 2009
Location: Richmond, VA
Posts: 811
Rep Power: 16
infernosg is on a distinguished road
Quote:
Originally Posted by t_g_farrell View Post
Nice SA! About time some folks on this site show a little 1st gen love! Those waffles still
look new.
They're in pretty good shape, but not perfect. There's some oxidation where wheel weights were installed in the past and one of the center caps has paint peeling. Still, they're not bad for their age and hopefully they'll look better when I get a chance to do more than just a quick wash.

Quote:
Originally Posted by t_g_farrell View Post
I would replace the master/slave soon. Probably a lot of corrosion in there. Do the hose
too at that time. How does the brake fluid look? You should probably start collecting all
the rubber hoses to replace the stock ones. At this age they are all probably deteriorated.
The brake master cylinder was replaced in 1988, which is why I think that was the last time the fluid was changed. I ended up flushing about 32 oz of new fluid through the brakes and clutch. In the end clean, clear-yellow fluid was flowing from all the bleeders. The brake and clutch feel is MUCH better. Right now I just want to get the 25,000 mile maintenance done but I will definitely be keeping an eye on the brakes. I'll probably rebuild the brake and clutch master cylinders, clutch slave cylinder, front calipers, and rear drums and replace all the soft lines, rotors, pads, shoes, and associated hardware at some point in the near future just to be safe.
infernosg is offline  
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com