|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
|
Thread Tools | Display Modes |
|
|
01-15-2016, 11:20 PM
|
#1 |
|
The Newbie
Join Date: May 2015
Posts: 4
Rep Power: 0  |
Just pulled my main relay, decided that I'll probably just chop the connector off the side that powers the coils for the rx7 and and mate the 1jz injector and igniter wires to it.
But, the wires on my relay aren't true to the FSM... The fsm shows for Non-Turbo 1989-1991 Models (this is a 1990) Two Prong Connector: Black and Black/white. Mine are black/yellow, and white/black. Four Prong Connector: Black/white, and black/yellow, White/blue, and White/red. Mine are Blue, another Blue, Black, and Black/yellow (possibly white, age). Help? I'm very confused. Last edited by RX7powered; 01-16-2016 at 02:24 AM. |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
