Finally getting to the very bottom of the air pump removal

b&brx8 · 12-27-2015, 11:33 AM

All you need is a dual-belt pulley for the alternator and two identical alternator belts (same length for obvious reasons). That's it. Two belts are needed to avoid slippage on the fan/water pump pulley.

Use an impact to remove the old 2 piece single pulley and just use the same hardware to re-install dual pulley. Very simple and NO other mods required.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-27-2015, 11:33 AM	#2
b&brx8 The Newbie Join Date: Apr 2008 Location: columbus, ohio Posts: 26 Rep Power: 0	All you need is a dual-belt pulley for the alternator and two identical alternator belts (same length for obvious reasons). That's it. Two belts are needed to avoid slippage on the fan/water pump pulley. Use an impact to remove the old 2 piece single pulley and just use the same hardware to re-install dual pulley. Very simple and NO other mods required.