06-30-2008, 06:02 PM
|
#1 |
|
Guest
Posts: n/a
|
my race
http://youtube.com/watch?v=wQen5hFMGHI
My car 86 RX7 13BT Swapped N/A drive train 6 puk Spec clutch Fidanza flywheel stock S4 turbo 3" V-band downpipe LARGE street port Large exhaust port 6psi FMIC STOCK S4 ecu 720cc secondarys 550cc primarys Competitor 240sx SR20DET swap 16psi aftermarket ECU FMIC IC hard pipes first time the camera shut down cause a car was coming so I did not run 2nd time he said he had no traction 3rd race he launched and got the pull untill I hit second... SEE YAAAA! btw since I am using the n/a drivetrain I cant "launch" all of those are rolling out the clutch then stompin on the pedal.. I NEVER launched the car oh yeah and on the last run I blew my IC pipe off and still won Last edited by SpooledupRacing; 06-30-2008 at 06:08 PM.. |
|
|
06-30-2008, 06:18 PM
|
#2 | |
|
FUCK the fucking fuckers
Join Date: Mar 2008
Location: THE only Bay Area, Northern California
iTrader: (7)
Posts: 3,172
Rep Power: 20  |
why are you wasting gas on a 240?
go kill a V8 and redeem yourself. Or at least win some gas money if you're gonna go waste it on slow cars. you have a light FC + turbo so no matter what, YOU WIN. How's the tranny and rear end holding up? Everyone says that the NA drivetrain is weak while others say it's fine for a stock 13BT. How do you like it so far? I believe it's weak but i'm only basing it on an NA motor.
__________________
Quote:
 Last edited by Phoenix7; 06-30-2008 at 06:28 PM.. |
|
|
|
|
06-30-2008, 06:28 PM
|
#3 |
|
Guest
Posts: n/a
|
sr20det (turbo swapped car on 16psi) against my measily 6psi
I figured it would be a close race... guess I was wrong.. I wont be racing till I get the engine pulled and the ring replaced. then I will take it to a dyno and a track to get times. he said he ran 13.1 in the 1/4 I beat him by 3 cars atleast |
|
|
|
06-30-2008, 06:32 PM
|
#4 | |
|
FUCK the fucking fuckers
Join Date: Mar 2008
Location: THE only Bay Area, Northern California
iTrader: (7)
Posts: 3,172
Rep Power: 20 |
I NOTICED that it said SR20 in your description but KA-T in the vid. Either way you rocked him and I don't see how it's a 13 sec. car.
See edits above also.
__________________
Quote:
|
|
|
|
|
|
06-30-2008, 06:49 PM
|
#5 |
|
Guest
Posts: n/a
|
the person that posted that was not there.. he told me it is a SR20DET
the trans is starting to grind into 2nd and 3rd but it pulls fine.. the rear end is fine to (not LSD) |
|
|
|
07-01-2008, 04:37 PM
|
#7 |
|
Rotary Fanatic
|
yah.. that is not a 13.1 second 240.
and the NA rear end is good to around 300hp. you'll prolly blow it up eventually with 200 or whatever, but after 300 they wont last more than two clutch drops. ps street racing is bad- go to a drag strip! ok i get that you dont wanna blow up your drivetrain. o well.
__________________
|
|
|
|
Linear Mode
