wheels & tires

rotoruben7 · 11-07-2014, 10:36 AM

Wats up rotary fanatics? My question is, will 15x8 wheels with 235/60R15 MT tires fit on a 85 stock fb without any issues? Anyone plz....

GySgtFrank · 11-08-2014, 10:50 AM

Not really, however anything can fit if you use a big enough hammer (and torch and welder).

You might get them to fit in the back if you have the exact offset needed, but they will not fit up front. For a stock setup most people go with a 205/50 15 and that is really close, requiring careful measurement on wheel offset.

11-07-2014, 10:36 AM	#1
rotoruben7 The Newbie Join Date: Dec 2013 iTrader: (0) Posts: 2 Rep Power: 0	wheels & tires Wats up rotary fanatics? My question is, will 15x8 wheels with 235/60R15 MT tires fit on a 85 stock fb without any issues? Anyone plz.... Last edited by rotoruben7; 11-07-2014 at 10:42 AM..

11-08-2014, 10:50 AM	#2
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. iTrader: (0) Posts: 1,005 Rep Power: 15	Not really, however anything can fit if you use a big enough hammer (and torch and welder). You might get them to fit in the back if you have the exact offset needed, but they will not fit up front. For a stock setup most people go with a 205/50 15 and that is really close, requiring careful measurement on wheel offset. __________________ 1979 SA22C (parts of one anyway) http://rotarycarclub.com/rotary_foru...ad.php?t=15585 1975 MG Midget (building) http://rotarycarclub.com/rotary_foru...ad.php?t=18681 1988 N/A SE model FC, dead stock and less than 85k on the clock. This one actually runs, so I don't fuck with it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode