Ignition timing help request

tom93r1 · 10-02-2014, 04:34 PM

First you need to determine what pulley you have on there. Different engines and different years had a few different timing marks so until you know for sure what marks are on your pulley you won't be able to time it correctly. And once you have that figured out, it probably doesn't matter if you time it according to GSL-se instructions or REPU instructions. Neither will be the same as your setup but both are a good starting point. Once you have it set to one of those two specs then you can fiddle with it until it feels right.

10-02-2014, 04:34 PM	#5
tom93r1 Rotary Fan in Training Join Date: Feb 2008 Posts: 45 Rep Power: 0	First you need to determine what pulley you have on there. Different engines and different years had a few different timing marks so until you know for sure what marks are on your pulley you won't be able to time it correctly. And once you have that figured out, it probably doesn't matter if you time it according to GSL-se instructions or REPU instructions. Neither will be the same as your setup but both are a good starting point. Once you have it set to one of those two specs then you can fiddle with it until it feels right. __________________ 74 REPU big port 13b Weber 48 DCO 93 RX7 R1 76 Suzuki RE5

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode