What size wrench passanger side oil cooler

whitetiger777 · 12-21-2013, 03:10 PM

So my passenger side oil cool leaks. I have a replacement cooler. I read the the wrench needed to disconnect the hoses from the oil cooler it's self is a 23mm. I got one and it's not even close. The walk to Sears is about a mile. What size do I need before I make that walk again?

cewrx7r1 · 01-06-2014, 04:41 PM

Measure it!

Rotary Evolution · 01-07-2014, 02:08 PM

are you sure you actually got a 23mm socket? all the OEM oil cooler banjos have a 23mm socket head, so unless it was replaced with a non OEM banjo it should have fit.

12-21-2013, 03:10 PM	#1
whitetiger777 The Newbie Join Date: Jan 2013 iTrader: (0) Posts: 20 Rep Power: 0	What size wrench passanger side oil cooler So my passenger side oil cool leaks. I have a replacement cooler. I read the the wrench needed to disconnect the hoses from the oil cooler it's self is a 23mm. I got one and it's not even close. The walk to Sears is about a mile. What size do I need before I make that walk again?

01-07-2014, 02:08 PM	#3
Rotary Evolution rotaryevolution.net Join Date: Feb 2011 Location: Las Vegas, NV iTrader: (0) Posts: 248 Rep Power: 14	are you sure you actually got a 23mm socket? all the OEM oil cooler banjos have a 23mm socket head, so unless it was replaced with a non OEM banjo it should have fit. __________________ http://rotaryevolution.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-06-2014, 04:41 PM	#2
cewrx7r1 The Judge Join Date: Feb 2008 iTrader: (0) Posts: 196 Rep Power: 17	Measure it!