One of our Current Rx7 Projects "The Lady"

MinotaurRacing · 11-28-2013, 06:26 AM

For those old enough to remember Airwolf, we were given "The Lady" to rebuild. When we first picked up this car, it looked as though it had been parked in the sea! It was probably the worst Rx7 I had seen for rust, however a project is a project....and a little bit of rust shouldn't stand in the way of what can be achieved!

The brief was quite simple...and just for once brief! Get the car up to a standard where I can gain some joy from driving it again. So this is what we have done.

This is the car as we received it. It was as you can see looking pretty sorry for itself

Dents in the doors, wings, the bumper had been knocked against a curb, and the interior...was something to behold! The previous owner had lavished it with some gold wrap...which was just disgusting!

The door was un-recoverable, so we sourced a new one and then set to getting the wheels done.

They were a tad rusty, pitted and scuffed and certainly not as should be!

One of the finished wheels, having repaired and polished the rims and powder coated the centres...replaced all of the bolts

MinotaurRacing · 11-28-2013, 07:04 AM

Next was stripping down the car. we had already supplied the strut brace for the front and both the rear harness bar, harnesses and battery box. You will probably start to notice the purple theme as the build goes on!

MinotaurRacing · 11-28-2013, 07:11 AM

Time to mock up the new intercooler and radiator. We use an extremely efficient core, and then make the end tanks ourselves along with pressure testing them and fitting our own brackets.

Finally she is ready on the dolly to head for paint. All of the proprietary work has been completed, so once she is back...just a case of build

MinotaurRacing · 11-28-2013, 07:21 AM

Body Repairs and primer time.

MinotaurRacing · 11-28-2013, 07:22 AM

The purple fascination is back

We powder coated the subframes!

MinotaurRacing · 11-28-2013, 07:51 AM

Our new bumper we made for the car.

The dip comes from not being bolted all along the front leading edge. Shut lines around the edges are fantastic, so really happy with the way it has come out of the mould.

MinotaurRacing · 11-28-2013, 07:53 AM

Lastly for the moment. The door shuts, engine bay and under wing sections have all been painted the silver flip paint. This looks very impressive, and is going to look stunning when the sunny weather decides to show itself

Rest of the bodyshell being painted for delivery next week. Then the rebuild can start!

hozzmanrx7 · 12-02-2013, 04:09 PM

This looks like shots from the first half of a Wheeler Dealer episode.

Looking forward to the broadcast of the 2nd half.

MinotaurRacing · 12-03-2013, 10:32 AM

Quote:

Originally Posted by hozzmanrx7

This looks like shots from the first half of a Wheeler Dealer episode.

Looking forward to the broadcast of the 2nd half.

So am I! lol

it is a good build, however we are at the mercy of the painters at the moment...and so out of our hands, but it has given us time to finish off the 2 MG ZS race preps we are doing at the moment

and also

The two sides to our business

11-28-2013, 06:26 AM	#1
MinotaurRacing Rotary Fan in Training Join Date: Nov 2013 iTrader: (0) Posts: 37 Rep Power: 0	One of our Current Rx7 Projects "The Lady" For those old enough to remember Airwolf, we were given "The Lady" to rebuild. When we first picked up this car, it looked as though it had been parked in the sea! It was probably the worst Rx7 I had seen for rust, however a project is a project....and a little bit of rust shouldn't stand in the way of what can be achieved! The brief was quite simple...and just for once brief! Get the car up to a standard where I can gain some joy from driving it again. So this is what we have done. This is the car as we received it. It was as you can see looking pretty sorry for itself Dents in the doors, wings, the bumper had been knocked against a curb, and the interior...was something to behold! The previous owner had lavished it with some gold wrap...which was just disgusting! The door was un-recoverable, so we sourced a new one and then set to getting the wheels done. They were a tad rusty, pitted and scuffed and certainly not as should be! One of the finished wheels, having repaired and polished the rims and powder coated the centres...replaced all of the bolts __________________ Minotaur Racing Race Builds Custom Parts www.FaceBook.com/MinotaurRacing Last edited by MinotaurRacing; 11-28-2013 at 06:57 AM..

11-28-2013, 07:04 AM	#2
MinotaurRacing Rotary Fan in Training Join Date: Nov 2013 iTrader: (0) Posts: 37 Rep Power: 0	Next was stripping down the car. we had already supplied the strut brace for the front and both the rear harness bar, harnesses and battery box. You will probably start to notice the purple theme as the build goes on! __________________ Minotaur Racing Race Builds Custom Parts www.FaceBook.com/MinotaurRacing

11-28-2013, 07:11 AM	#3
MinotaurRacing Rotary Fan in Training Join Date: Nov 2013 iTrader: (0) Posts: 37 Rep Power: 0	Time to mock up the new intercooler and radiator. We use an extremely efficient core, and then make the end tanks ourselves along with pressure testing them and fitting our own brackets. Finally she is ready on the dolly to head for paint. All of the proprietary work has been completed, so once she is back...just a case of build __________________ Minotaur Racing Race Builds Custom Parts www.FaceBook.com/MinotaurRacing

11-28-2013, 07:21 AM	#4
MinotaurRacing Rotary Fan in Training Join Date: Nov 2013 iTrader: (0) Posts: 37 Rep Power: 0	Body Repairs and primer time. __________________ Minotaur Racing Race Builds Custom Parts www.FaceBook.com/MinotaurRacing

11-28-2013, 07:22 AM	#5
MinotaurRacing Rotary Fan in Training Join Date: Nov 2013 iTrader: (0) Posts: 37 Rep Power: 0	The purple fascination is back We powder coated the subframes! __________________ Minotaur Racing Race Builds Custom Parts www.FaceBook.com/MinotaurRacing

11-28-2013, 07:51 AM	#6
MinotaurRacing Rotary Fan in Training Join Date: Nov 2013 iTrader: (0) Posts: 37 Rep Power: 0	Our new bumper we made for the car. The dip comes from not being bolted all along the front leading edge. Shut lines around the edges are fantastic, so really happy with the way it has come out of the mould. __________________ Minotaur Racing Race Builds Custom Parts www.FaceBook.com/MinotaurRacing

11-28-2013, 07:53 AM	#7
MinotaurRacing Rotary Fan in Training Join Date: Nov 2013 iTrader: (0) Posts: 37 Rep Power: 0	Lastly for the moment. The door shuts, engine bay and under wing sections have all been painted the silver flip paint. This looks very impressive, and is going to look stunning when the sunny weather decides to show itself Rest of the bodyshell being painted for delivery next week. Then the rebuild can start! __________________ Minotaur Racing Race Builds Custom Parts www.FaceBook.com/MinotaurRacing

12-02-2013, 04:09 PM	#8
hozzmanrx7 7Club Refugee Join Date: Nov 2010 Location: Chino Hills, CA iTrader: (0) Posts: 95 Rep Power: 15	This looks like shots from the first half of a Wheeler Dealer episode. Looking forward to the broadcast of the 2nd half. __________________ "he's a tool that moved from being an abusive moderator to a troll that acts like a tool to get his attention now." John (Jon) Michael Borry = RX7roller02 = skydivr7673 And that's the truth. http://rotarycarclub.com/rotary_foru...t=17659&page=7

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode