Whizbang's GSLSE

[Whizbang]

some updates and pictures.

the car cranks now. had issues with a ground causing slow cranking which has been resolved. the engine ground was just poor. moved it and added a second one.

Waiting for some 1/8" BSPT plugs to get here to close off the unused oil pressure port so i can continue trying to start the car. Using a Racing Beat sandwich adapter currently.

Wire is a fiero fan and is wired up to a relay for use with either a switch, or once I get another temp switch for the radiator, it can also be on via thermo switch. Since its a 3/8-18 thread sensor, im hoping something else used that so i can find other temp options.

But yea. seat still needs mounted and all that crap. still have no exhaust on it and I need to get my hands on a different 13b header. I think i have an FC one on there now and it sits far too low for my liking.

[scarsofcarma]

Originally Posted by Whizbang

I need to get my hands on a different 13b header. I think i have an FC one on there now and it sits far too low for my liking.

Ah yeah I was wondering about that... how the header sits on an fb with an fc subframe swap... I also want a new exhaust on mine but I wanna make it all custom. I can't stand how pathetic and quiet the stock exhaust is... Got access to a welder now, so I need to get some piping and get to work. Not sure if I'd wanna make my own header though... kinda hard to do much better then a racing beat header... except maybe using bigger runners so it doesn't make such a sharp turn off the irons?

I guess you didn't make it down to sevenstock 16? It was sooo awesome! Worth every bit of the 10 hour drive.