Redoing bushings

DriftingFC · 05-27-2008, 11:16 AM

I got the OTC stuff too. More expensive then the Harbor Freight stuff, but I get a replacement the day I break my OTC!!!!! (I have done it a few times)

My5ABaby · 05-27-2008, 11:56 AM

Quote:

Originally Posted by DriftingFC

YES. Unless you dont mind TRYING to turn a wrench or ratchet on the press. I mean TRYING because your are will get tired sore and take a day or 2 longer then running an air gun.

I'll probably try it without first because I really don't want to buy a compressor/air gun. Well, I do kinda, but I really can't afford them...

TehMonkay · 05-27-2008, 01:27 PM

Quote:

Originally Posted by DriftingFC

http://www.harborfreight.com/cpi/cta...emnumber=38335

This and an air gun. Sawsall, and some elbow grease.

So i should be able to do my bushings/subframe and differential mounts with this, an impact, a compressor, sawzall and a torch and or drill?

DriftingFC · 05-27-2008, 02:06 PM

pretty much. I have not done miney yet, but from what I have seen in my master bushing pack, it works.

The subframe and diff mounts I dont have, so I cant answer for them.

AwakenNoMore · 05-28-2008, 12:18 AM

i heard the new bushings go in easy and all thats really needed is a good rubber mallet, any truth to this?

My5ABaby · 05-28-2008, 07:20 AM

http://knoxville.craigslist.org/tls/697709729.html

Is that a good price?

classicauto · 05-28-2008, 08:38 AM

Quote:

Originally Posted by AwakenNoMore

i heard the new bushings go in easy and all thats really needed is a good rubber mallet, any truth to this?

haha, nope.

Well, if you're talking strictly about putting the new bushings in then yeah, they slide in like butter.

My5Ababy - looks like a decent unit for the price. Comparitvely I've purchased a 7.5hp 22cfm unit with a 60Gal horizontal tank at an auction of a shop that clsoed for $750 and considered it a great deal. That seems very fair for what you're getting. Not to mention money talks....wave some bills at him and he may crumble 100-150 dollars under

05-28-2008, 12:18 AM	#20
AwakenNoMore Rotary Fanatic Join Date: Feb 2008 Location: Gilbert, Arizona iTrader: (1) Posts: 107 Rep Power: 17	i heard the new bushings go in easy and all thats really needed is a good rubber mallet, any truth to this? __________________ 1993 VR Touring, motor built by Arizona Rotary Rockets.

05-28-2008, 07:20 AM	#21
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	http://knoxville.craigslist.org/tls/697709729.html Is that a good price? __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-27-2008, 11:16 AM	#16
DriftingFC Rotary Fan in Training Join Date: Feb 2008 Location: Pittsburgh iTrader: (0) Posts: 81 Rep Power: 17	I got the OTC stuff too. More expensive then the Harbor Freight stuff, but I get a replacement the day I break my OTC!!!!! (I have done it a few times)

05-27-2008, 02:06 PM	#19
DriftingFC Rotary Fan in Training Join Date: Feb 2008 Location: Pittsburgh iTrader: (0) Posts: 81 Rep Power: 17	pretty much. I have not done miney yet, but from what I have seen in my master bushing pack, it works. The subframe and diff mounts I dont have, so I cant answer for them.