Checking clutch arm/pressure plate

JL1RX7 · 10-06-2013, 06:56 PM

Possible the throw-out bearing slipped off the fork? Don't think it would be possible kitted up. But never know.

When you push the peddle in getting full stroke on the slave.(Yes I know that could be taken the wrong way)

WankelsRevenge · 10-06-2013, 07:40 PM

Quote:

Originally Posted by JL1RX7

When you push the peddle in getting full stroke on the slave.(Yes I know that could be taken the wrong way)

I believe so, Its deffinatly pushing against the clutch arm. The main issue seems to be the clutch isnt disengaging now is the pedal coming back up at all. I guess in the next few days I might see if I can get it up on jack stands and drop the trans and see what I find. Any tips on how I can see if the pressure plate is shot?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-06-2013, 06:56 PM	#1
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA Posts: 487 Rep Power: 18	Possible the throw-out bearing slipped off the fork? Don't think it would be possible kitted up. But never know. When you push the peddle in getting full stroke on the slave.(Yes I know that could be taken the wrong way)