How to: Mazda Type M (N/A) Transmission Disassembly/Assembly

[Rotary Evolution]

most of the steps are the same for the turbo transmission as well except the last step is walking the main gear sets out of the case once all other steps are complete. it has to remain inside the box until the back is disassembled.

[JL1RX7]

Mods can we get this stickied so it is always at the top. Great write up! Thank you for the hard work.

[RETed]

Agreed.
Who is doing the pic hosting?
I hope someone can mirror this write-up later?
I would for the write-up to end up like TTT's power-to-manual steering rack conversion where we lost some of the original pics.


-Ted

[infernosg]

Originally Posted by My5ABaby

Wow, this is probably the most detailed write up I've seen. Well done.

Thanks! I've been sitting on this a while and got some free time to start putting everything together. I know it isn't very technical, but the FSM is actually very good in this respect. I just find the diagrams lacking sometimes hence why I made this.

Originally Posted by JL1RX7

Mods can we get this stickied so it is always at the top. Great write up! Thank you for the hard work.

Thanks! I'm still making some tweaks to my initial posts and I've got to finish the last few steps though.

Originally Posted by RETed

Agreed.
Who is doing the pic hosting?
I hope someone can mirror this write-up later?
I would for the write-up to end up like TTT's power-to-manual steering rack conversion where we lost some of the original pics.


-Ted

Right now I'm linking to one of my public Picasa galleries. It's the same one I use to document my current build. I hasn't failed me yet but I would love a more permanent solution. I too was disappointed some pics were lost in the steering rack thread although it wasn't too hard to figure out. I'm open to suggestions.