|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
|
|
Thread Tools | Display Modes |
07-21-2013, 07:18 PM
|
#2 |
|
Professional Stick Poker
Join Date: Feb 2011
Location: Stafford, Ks.
Posts: 1,012
Rep Power: 16  |
Check your tie rods and the idler arm bushing first. I had a similar problem which turned out to be the idler arm bushing being shot. MazdaTrix has the bushing and it's not expensive to replace. Otherwise it's in the box itself. You can tighten it up a little with the backlash screw, but be careful as it doesn't take much and if you go too far you could have problems.
__________________
1988 N/A SE 2+2, dead stock and staying that way.  1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585 |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode