|
|
|
||||||||
| 3rd Gen RX-7 Engine Parts Only Engine Related parts ONLY! |
 |
|
|
Thread Tools | Display Modes |
|
|
|
|
||||||||
| 3rd Gen RX-7 Engine Parts Only Engine Related parts ONLY! |
|
|
|
Thread Tools | Display Modes |
12-07-2012, 09:37 PM
|
#2 |
|
Rotary Fanatic
|
Mitch, GLWS!
__________________
Live the DriFD3S or die trying. JDM True Story. the Vacuum line, to my MAP became detached while I was legally drifting. my engine would not rev past 2500, and idled from 300-650 and was stalling. Fortunately, I acquired a Zip-Tie. I fixed a catastrophic engine failure, With a Zip-Tie. JDM FTW. |
|
|
|
12-10-2012, 10:53 AM
|
#4 |
|
Respecognize!
|
ah crap, i could use this for the merkur.... how accurate is the control on these? the merkur will have antilag
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
|
|
|
|
12-10-2012, 11:27 AM
|
#5 | |
|
Rotary Fanatic
|
Quote:
Reviews are sort of mixed too so that probably isn't much help. I've heard a lot of people say its great, easy to use, accurate etc. and others say that it isn't very intuitive to use and that they have their boost drop off a bit. In the end, it's a middle of the road boost controller. I bought it because I liked the gauge display / interface but then I decided to go a different route because of some of the options on the blitz i-color unit. If your hesitant though.. put it this way - This probably cost me 350 by the time it hit my doorstep. If you buy it and don't like it, you could sell it used for around what I'm asking.
__________________
|
|
|
|
|
Linear Mode
