Single turbo harness conversion grounding

[C. Ludwig]

Have you realized yet that the black/white wires are not grounds but are, in fact, switched 12V+?

[Mitchocalypse]

Originally Posted by C. Ludwig

Have you realized yet that the black/white wires are not grounds but are, in fact, switched 12V+?

I was sort of suspecting them of not being grounds because they don't actually ground anywhere lol.

Switched 12v+ .. is that basically like a key on ignition source? And if so i could remove that whole wire because it isn't required anymore.

-I really hate electrical stuff. The only reason I attempted this in the first place is because i had (what I initially thought) clear write up. I guess it was also a good chance to learn the harness a lot better and to redo the loom but when it comes to circuitry i'm just turned right off.

I think thats everything then. This really cleaned up the harness.

[TitaniumTT]

Originally Posted by C. Ludwig

Have you realized yet that the black/white wires are not grounds but are, in fact, switched 12V+?

I really need to start wearing my glasses... I thought that was a reflection from the flash

[C. Ludwig]

Originally Posted by TitaniumTT

I really need to start wearing my glasses... I thought that was a reflection from the flash

Actually, the first tell for me was his talking about grounding the BAC.