94 fd $13800 obo

yessirfish31 · 07-10-2012, 05:00 AM

Modifications
Pretty much every RX7 Gen 3 (FD) on the market will be abused and modified. This car is an exception as it is kept as stock as possible with only reliability/convenience upgrades. I did however make a change while replacing the fuel lines by converting to the Simplified Seq. The car has upgraded 17” wheels. These are not aftermarket wheels. The wheels are from Japanese domestic market RX7 circa 99.
The engine is equipped with an aftermarket aluminum radiator. It has improved cooling efficiency. The intercooler is upgraded to a Blitz part. The original intercooler is included should you prefer to restore the car to its original condition. The intercooler is powder-coated and looks stock. It improves cooling of the compressed air.
There is also an aftermarket down pipe, mid-pipe and high flow HKS Hi-Power catback exhaust installed for better flow, cooling and performance. This modification reduces under the hood temperatures by removing an extra heat source.
The car is equipped with an aftermarket ECU*. The information on the ECU can be found at http://www.srmotorsports.com/sr93ecu.html . The installation includes a Inovate LC-1 wideband O2 sensor. This ECU is wired to the Malfunction Indicator Light. It blinks when excessive detonation or other problems are detected.
The water temperature gauge is modified*. It looks stock but it displays the temperature in linear fashion. This helps you see what is really going on with the cooling watertemperature.
Miscellaneous updates
Remote: A Viper wireless start and remote opener is installed. All connections were soldered and insulated. Solenoids are installed in driver door (passenger door comes with factory one) and the hitch. Safety switches were wired into the gearbox and the hood to prevent engine start while in
gear or with open hood. The factory alarm is completely functional and arms/disarms the system when operated from the remote.
Audio
There is a custom-built subwoofer with a dedicated custom-built amplifier installed in the trunk. It takes very little space. Front doors are sound-proofed. Boxed 6.5” speakers with tweeters are installed. There is a double-din space with simple stereo installed. The radio and the CD player work well.
Maintenance History
I have all the receipts for the parts used.
02/02/2011 82000
New Battery
08/29/2010 81700
Oil change. Castrol 20w-50
04/13/2012 84700
Oil change. Castrol 20w-50
06/30/2012 82400
Replaced turbos - used a set from a car with 40k miles. Rebuilt turbo had the impeller failure.
Coolant replaced.
New plugs installed.
09/09/2008 74800
Oil change. Castrol 20w-50, Mobil 1 filter
07/01/2008 73900
New alternator installed
05/05/2008 73300
-Viper keyless entry, trunk pop and door solenoid
03/20/2008 73000
Oil change. Castrol 20w-50, Mobil 1 filter
Oil change - gearbox (Neo oil)
k&n air filter
Wideband o2
01/15/2008 73000
Leak at oil injector nozzle (replaced nozzle)
New oil pressure sensor
New o-rings, intake gaskets
New water hoses
New expansion tank
New fuel hoses kit
Injectors cleaned/tested
Rebuilt turbo, new manifold
Vacuum hose job - all silicone with clamps. Turbo hoses - viton
Wiring harness renew, new silicone wrap, new connectors for injectors
New dashpot - improve throttle control.
09/20/2007 72800
New differential bushings(OE)
09/15/2007 72800
New hood insulation(OE)
08/15/2007
Windshield washer hose (replace rotted hose)
New horn (replace broken one)
07/25/2007 72500
Koni shocks/mount rubber
Resurfaced rotors, painted ?, rebuilt calipers, new pads installed, bled brakes
99 style wheels installed
Front suspension dust boots(ball joints)
07/21/2007 72500
Fuel filter
05/20/2007 72000
Rear trailing arm bushings
Rear toe link bushings
Retrofit AC, flush, o-rings, charge
04/06/2007 71800
New exedy stage 1 organic clutch
Exhaust rubber mount
03/28/2007 71600
Pillow ball bushings
03/20/07 71500
New oxygen sensor

LuckySeven fc3s · 07-10-2012, 12:13 PM

pics?

yessirfish31 · 07-10-2012, 01:14 PM

I will have pictures up within the next day or so.

yessirfish31 · 07-11-2012, 12:53 AM

jordanowski · 07-13-2012, 01:37 PM

still for sale?

yessirfish31 · 07-13-2012, 10:04 PM

yea 218-390-7734 or yessirfish31@yahoo.com

07-10-2012, 05:00 AM	#1
yessirfish31 The Newbie Join Date: Feb 2012 Location: Duluth, MN iTrader: (0) Posts: 8 Rep Power: 0	94 fd $13800 obo Modifications Pretty much every RX7 Gen 3 (FD) on the market will be abused and modified. This car is an exception as it is kept as stock as possible with only reliability/convenience upgrades. I did however make a change while replacing the fuel lines by converting to the Simplified Seq. The car has upgraded 17” wheels. These are not aftermarket wheels. The wheels are from Japanese domestic market RX7 circa 99. The engine is equipped with an aftermarket aluminum radiator. It has improved cooling efficiency. The intercooler is upgraded to a Blitz part. The original intercooler is included should you prefer to restore the car to its original condition. The intercooler is powder-coated and looks stock. It improves cooling of the compressed air. There is also an aftermarket down pipe, mid-pipe and high flow HKS Hi-Power catback exhaust installed for better flow, cooling and performance. This modification reduces under the hood temperatures by removing an extra heat source. The car is equipped with an aftermarket ECU. The information on the ECU can be found at http://www.srmotorsports.com/sr93ecu.html . The installation includes a Inovate LC-1 wideband O2 sensor. This ECU is wired to the Malfunction Indicator Light. It blinks when excessive detonation or other problems are detected. The water temperature gauge is modified. It looks stock but it displays the temperature in linear fashion. This helps you see what is really going on with the cooling watertemperature. Miscellaneous updates Remote: A Viper wireless start and remote opener is installed. All connections were soldered and insulated. Solenoids are installed in driver door (passenger door comes with factory one) and the hitch. Safety switches were wired into the gearbox and the hood to prevent engine start while in gear or with open hood. The factory alarm is completely functional and arms/disarms the system when operated from the remote. Audio There is a custom-built subwoofer with a dedicated custom-built amplifier installed in the trunk. It takes very little space. Front doors are sound-proofed. Boxed 6.5” speakers with tweeters are installed. There is a double-din space with simple stereo installed. The radio and the CD player work well. Maintenance History I have all the receipts for the parts used. 02/02/2011 82000 New Battery 08/29/2010 81700 Oil change. Castrol 20w-50 04/13/2012 84700 Oil change. Castrol 20w-50 06/30/2012 82400 Replaced turbos - used a set from a car with 40k miles. Rebuilt turbo had the impeller failure. Coolant replaced. New plugs installed. 09/09/2008 74800 Oil change. Castrol 20w-50, Mobil 1 filter 07/01/2008 73900 New alternator installed 05/05/2008 73300 -Viper keyless entry, trunk pop and door solenoid 03/20/2008 73000 Oil change. Castrol 20w-50, Mobil 1 filter Oil change - gearbox (Neo oil) k&n air filter Wideband o2 01/15/2008 73000 Leak at oil injector nozzle (replaced nozzle) New oil pressure sensor New o-rings, intake gaskets New water hoses New expansion tank New fuel hoses kit Injectors cleaned/tested Rebuilt turbo, new manifold Vacuum hose job - all silicone with clamps. Turbo hoses - viton Wiring harness renew, new silicone wrap, new connectors for injectors New dashpot - improve throttle control. 09/20/2007 72800 New differential bushings(OE) 09/15/2007 72800 New hood insulation(OE) 08/15/2007 Windshield washer hose (replace rotted hose) New horn (replace broken one) 07/25/2007 72500 Koni shocks/mount rubber Resurfaced rotors, painted ?, rebuilt calipers, new pads installed, bled brakes 99 style wheels installed Front suspension dust boots(ball joints) 07/21/2007 72500 Fuel filter 05/20/2007 72000 Rear trailing arm bushings Rear toe link bushings Retrofit AC, flush, o-rings, charge 04/06/2007 71800 New exedy stage 1 organic clutch Exhaust rubber mount 03/28/2007 71600 Pillow ball bushings 03/20/07 71500 New oxygen sensor

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-10-2012, 12:13 PM	#2
LuckySeven fc3s fc3s_nataku on rx7club Join Date: Apr 2009 Location: OrangePark FL iTrader: (0) Posts: 35 Rep Power: 0	pics?

07-10-2012, 01:14 PM	#3
yessirfish31 The Newbie Join Date: Feb 2012 Location: Duluth, MN iTrader: (0) Posts: 8 Rep Power: 0	I will have pictures up within the next day or so.

07-11-2012, 12:53 AM	#4
yessirfish31 The Newbie Join Date: Feb 2012 Location: Duluth, MN iTrader: (0) Posts: 8 Rep Power: 0

07-13-2012, 01:37 PM	#5
jordanowski The Newbie Join Date: Mar 2012 iTrader: (0) Posts: 8 Rep Power: 0	still for sale?

07-13-2012, 10:04 PM	#6
yessirfish31 The Newbie Join Date: Feb 2012 Location: Duluth, MN iTrader: (0) Posts: 8 Rep Power: 0	yea 218-390-7734 or yessirfish31@yahoo.com