Garfinkle's Air Pump Pully Kit Sneak Preview

Garfinkles Motor Works · 04-27-2008, 09:38 AM

The mount should not twist or bend ,it adjust as stock with the stock belt .If you use a shorter belt it may clear a single turbo install . The shaft can be moved foward or back to aline the pulley with the others .The end product will have CNC cut alum pulley . The bearing is a double row sealed part that is rated for 12,000 rpm . The brackets are steel as is the shaft .I will get the pulleys cut if there is any one wanting this unit .I will get more picts up as soon as I can get some one to help . Thanks Chad for the preview .

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-27-2008, 09:38 AM	#2
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	The mount should not twist or bend ,it adjust as stock with the stock belt .If you use a shorter belt it may clear a single turbo install . The shaft can be moved foward or back to aline the pulley with the others .The end product will have CNC cut alum pulley . The bearing is a double row sealed part that is rated for 12,000 rpm . The brackets are steel as is the shaft .I will get the pulleys cut if there is any one wanting this unit .I will get more picts up as soon as I can get some one to help . Thanks Chad for the preview .