Lsd

7799brady · 02-16-2012, 10:35 PM

Hello just joined and looking for info on LSD that will fit a 79 rear axle

burnoutking999 · 02-22-2012, 09:12 PM

I thought this thread was about a new chevy engine for a minute.

Kentetsu · 02-24-2012, 10:39 PM

With the right combination of driveshafts, you can make any of the 1st gen rears fit. The only issue you will run into is with a thread change on the brake lines. I believe www.re-speed.com sells an adapter set for that purpose.

A GSL will have 4x110 spacing and disc brakes/lsd
A GSL SE will have 4x114(?) spacing and disc brakes/lsd

So, unless you want to end up with an unintended wheel change, be careful which rear you get.

.

02-16-2012, 10:35 PM	#1
7799brady The Newbie Join Date: Feb 2012 iTrader: (0) Posts: 1 Rep Power: 0	Lsd Hello just joined and looking for info on LSD that will fit a 79 rear axle

02-24-2012, 10:39 PM	#3
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan iTrader: (1) Posts: 530 Rep Power: 17	With the right combination of driveshafts, you can make any of the 1st gen rears fit. The only issue you will run into is with a thread change on the brake lines. I believe www.re-speed.com sells an adapter set for that purpose. A GSL will have 4x110 spacing and disc brakes/lsd A GSL SE will have 4x114(?) spacing and disc brakes/lsd So, unless you want to end up with an unintended wheel change, be careful which rear you get. . __________________ "Learn from the past, or it will become your future...." '85 GS 12a + LSD/Sterling carb/Respeed coilovers/Respeed front swaybar/Respeed adj. rear spring perches/Illuminas/Bilsteins on rear AutoX vids @ http://www.youtube.com/user/Kentetsu1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-22-2012, 09:12 PM	#2
burnoutking999 The Newbie Join Date: Feb 2012 iTrader: (0) Posts: 21 Rep Power: 0	I thought this thread was about a new chevy engine for a minute.