JhnRX7's Weekend Track Toy Build

[yzf-r1]

Originally Posted by JhnRX7

One thing that I considered last winter while installing my bushings was adding zerk fittings. The general consensus is that they are not need with the SuperPro bushings so I decided not to install them. I never installed the SuperPro's on my front suspension arms, so those will be going in.

I think I read somewhere that zerks could weaken the bushings because you need to drill through the body of the bushing to lube the inner wear surface (which would also prevent it from moving freely). I used the Energy Suspension grease which I heard is good for 30k+ miles if you stay out of the wet/rain.