oil pan braces - Page 4

Garfinkles Motor Works · 10-11-2011, 01:57 PM

They will NOT fit the FC the motor mounts are different .

pistons · 10-16-2011, 07:31 PM

I'm in too, would it be wise to try to install in car? I would also like to do the engine mounts for the pan brace at the same time.

lwnslw · 12-19-2011, 01:59 PM

PM sent to David...

Garfinkles Motor Works · 03-17-2012, 03:06 AM

Not enough interest to go on .

Garfinkles Motor Works · 09-05-2012, 09:33 AM

Another batch will be ready in September if you need one you had better check on it now as about 20 of the 28 have been spoken for .

rotarylyman · 10-01-2012, 12:53 PM

PM sent to David

Garfinkles Motor Works · 10-03-2012, 09:39 AM

If you are reading the forum Then you will know that had another batch of oil pan braces made and they are selling now .If you need one email me to see if any are left .The cost is still $125 includes hardware and shipping in the USA . E-mail is garfinklemw@gmail.com

Kman Art · 10-08-2012, 07:05 PM

email sent

Garfinkles Motor Works · 10-09-2012, 04:39 AM

This run of braces is almost sold out ,If you need one first come first served .

Garfinkles Motor Works · 10-11-2012, 09:45 AM

Oil pan braces are SOLD OUT .If there are twenty presale orders I will do another run .Put your name on the thread in the 3rd gen section . Thanks to all who bought them in the past .

Garfinkles Motor Works · 04-30-2013, 08:37 PM

A new list has been started in the third gen section .4-30-2013

Garfinkles Motor Works · 07-10-2013, 06:46 PM

I HAVE OIL PAN BRACES READY TO SHIP AT THE SAME PRICE AS BEFORE .They are still $125 including all bolts ,o-ring and shipping in the USA . 7-10-2013

Garfinkles Motor Works · 09-20-2013, 07:00 PM

I have oil pan braces ready to ship ,those who said they wanted me to run another batch should at least reply .

howard coleman · 12-15-2013, 01:10 PM

David, i need another five.

howard

Garfinkles Motor Works · 02-13-2014, 10:11 PM

I have some braces ready two ship, todays date is 2 13 2014 .

10-16-2011, 07:31 PM	#47
pistons The Newbie Join Date: Oct 2010 Location: L.A Posts: 17 Rep Power: 0	I'm in too, would it be wise to try to install in car? I would also like to do the engine mounts for the pan brace at the same time. Last edited by pistons; 10-16-2011 at 07:34 PM.

12-19-2011, 01:59 PM	#48
lwnslw Rotary Fanatic Join Date: Mar 2008 Location: Boostville Posts: 193 Rep Power: 18	PM sent to David... __________________

10-01-2012, 12:53 PM	#51
rotarylyman Do Work!! Join Date: Apr 2009 Posts: 38 Rep Power: 0	PM sent to David __________________ Rotary Son!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-11-2011, 01:57 PM	#46
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	They will NOT fit the FC the motor mounts are different .

03-17-2012, 03:06 AM	#49
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Not enough interest to go on .

09-05-2012, 09:33 AM	#50
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Another batch will be ready in September if you need one you had better check on it now as about 20 of the 28 have been spoken for .

10-03-2012, 09:39 AM	#52
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	If you are reading the forum Then you will know that had another batch of oil pan braces made and they are selling now .If you need one email me to see if any are left .The cost is still $125 includes hardware and shipping in the USA . E-mail is garfinklemw@gmail.com

10-08-2012, 07:05 PM	#53
Kman Art The Converted Join Date: Oct 2012 Location: Cayman Islands Posts: 49 Rep Power: 0	email sent

10-09-2012, 04:39 AM	#54
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	This run of braces is almost sold out ,If you need one first come first served .

10-11-2012, 09:45 AM	#55
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Oil pan braces are SOLD OUT .If there are twenty presale orders I will do another run .Put your name on the thread in the 3rd gen section . Thanks to all who bought them in the past .

04-30-2013, 08:37 PM	#56
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	A new list has been started in the third gen section .4-30-2013

07-10-2013, 06:46 PM	#57
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I HAVE OIL PAN BRACES READY TO SHIP AT THE SAME PRICE AS BEFORE .They are still $125 including all bolts ,o-ring and shipping in the USA . 7-10-2013

09-20-2013, 07:00 PM	#58
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I have oil pan braces ready to ship ,those who said they wanted me to run another batch should at least reply .

12-15-2013, 01:10 PM	#59
howard coleman The Newbie Join Date: Dec 2008 Posts: 17 Rep Power: 0	David, i need another five. howard

02-13-2014, 10:11 PM	#60
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I have some braces ready two ship, todays date is 2 13 2014 .