For sale/Trade - 93 VR RX-7

SLOASFK · 12-21-2010, 01:43 PM

After a few years, I've decided to part with my twin turbo 93 RX-7.

Goodies:
700 miles on a rebuilt engine with very aggressive street port
Power FC/Commander (standalone ECU and handheld programmer/display)
Non-sequential factory twins
IRP dual intakes
Greddy FMIC
Greddy Elbow
Custom Y-pipe
Ceramic coated turbo manifold
38mm wastegate
3" wrapped downpipe
3" resonated midpipe
3.5" HKS Super Dragger II cat-back
Koyo N-flow radiator
17" SSR rims
CF exhaust shield
94+ interior
5sp RX-8 shift knob
99spec Nardi steering wheel with airbag
red stitched leather shift boot and ebrake boot
99spec gauge cluster
C-West N1 front bumper
99spec rear spoiler
99spec rear lights
Rear diff brace
850cc primary injectors
1480cc secondary injectors
Burnout front fenders

What it needs to be finished:
Paint and minor body work. There are a couple shallow dings on one of the doors and one larger dent near the rear bumper.
Suspension. Needs bushings, pillow balls and controll arms replaced. I am including a full set of pillow balls and control arms, so parts wise you would need to buy bushings.
Dash harness replaced? I'm not sure about this o e but the gauges don't all work, particularly, the fuel and temp gauges. The speedo stopped working just before I parked it last. I am including a new speedo sensor and dash harness with the car.

Other parts i'm including, off the top of my head:

New alt, power steering pump and water pump pulleys
Tien springs, 1.5" drop
About 1/2 of the fittings required to go dual oil cooler
Some prosport gauges, new in box

I'm looking for $8500 for the car.

Will trade for a *nice*, rust free, hard top, manual trans 4x4 Wrangler or for any combination of guns, ammo and cash.

My5ABaby · 12-21-2010, 05:29 PM

Quote:

Will trade for a *nice*, rust free, hard top, manual trans 4x4 Wrangler or for any combination of guns, ammo and cash.

You sure you're not from Tennessee?

Good luck with the sale.

SLOASFK · 12-21-2010, 10:12 PM

Quote:

Originally Posted by My5ABaby

You sure you're not from Tennessee?

Good luck with the sale.

In PA, we have Philly in the east, Pittsburgh in the west and Alabama in the middle. Guess where I live

stinksause · 12-30-2010, 11:29 AM

oh man ... I am looking at FD's for my friend .... makes me wanna try to trade my rx8 for this .... nice car ... bump

Car should make it to KDR on its own right?

SLOASFK · 01-01-2011, 10:29 PM

Should make it there no problem, as long as you're careful about your speed and rpms. I drove it home from IRP without issue and put a few hundred miles on it.

The car's located about an hour and a half +- from KDR, btw.

cakesbaby · 11-24-2011, 10:01 PM

do you still have the FD

12-21-2010, 01:43 PM	#1
SLOASFK Rotary Fanatic Join Date: Feb 2008 Location: Lancaster, PA iTrader: (4) Posts: 155 Rep Power: 17	For sale/Trade - 93 VR RX-7 - Located in PA After a few years, I've decided to part with my twin turbo 93 RX-7. Goodies: 700 miles on a rebuilt engine with very aggressive street port Power FC/Commander (standalone ECU and handheld programmer/display) Non-sequential factory twins IRP dual intakes Greddy FMIC Greddy Elbow Custom Y-pipe Ceramic coated turbo manifold 38mm wastegate 3" wrapped downpipe 3" resonated midpipe 3.5" HKS Super Dragger II cat-back Koyo N-flow radiator 17" SSR rims CF exhaust shield 94+ interior 5sp RX-8 shift knob 99spec Nardi steering wheel with airbag red stitched leather shift boot and ebrake boot 99spec gauge cluster C-West N1 front bumper 99spec rear spoiler 99spec rear lights Rear diff brace 850cc primary injectors 1480cc secondary injectors Burnout front fenders What it needs to be finished: Paint and minor body work. There are a couple shallow dings on one of the doors and one larger dent near the rear bumper. Suspension. Needs bushings, pillow balls and controll arms replaced. I am including a full set of pillow balls and control arms, so parts wise you would need to buy bushings. Dash harness replaced? I'm not sure about this o e but the gauges don't all work, particularly, the fuel and temp gauges. The speedo stopped working just before I parked it last. I am including a new speedo sensor and dash harness with the car. Other parts i'm including, off the top of my head: New alt, power steering pump and water pump pulleys Tien springs, 1.5" drop About 1/2 of the fittings required to go dual oil cooler Some prosport gauges, new in box I'm looking for $8500 for the car. Will trade for a nice, rust free, hard top, manual trans 4x4 Wrangler or for any combination of guns, ammo and cash. Last edited by SLOASFK; 03-30-2011 at 01:08 PM..

12-30-2010, 11:29 AM	#4
stinksause The Newbie Join Date: Apr 2010 iTrader: (0) Posts: 24 Rep Power: 0	oh man ... I am looking at FD's for my friend .... makes me wanna try to trade my rx8 for this .... nice car ... bump Car should make it to KDR on its own right? Last edited by stinksause; 12-30-2010 at 11:32 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-01-2011, 10:29 PM	#5
SLOASFK Rotary Fanatic Join Date: Feb 2008 Location: Lancaster, PA iTrader: (4) Posts: 155 Rep Power: 17	Should make it there no problem, as long as you're careful about your speed and rpms. I drove it home from IRP without issue and put a few hundred miles on it. The car's located about an hour and a half +- from KDR, btw.

11-24-2011, 10:01 PM	#6
cakesbaby The Newbie Join Date: Feb 2011 Location: greenville iTrader: (0) Posts: 7 Rep Power: 0	do you still have the FD