Twin Charged FD - Fraternal Twins

RX SE7EN · 11-12-2011, 09:24 AM

The build continues this weekend with new arrivals from Summit Racing

Whats inside?

A whole bunch of AN fittings, hose, and weld on bungs (steel and aluminum).
Sizes are:
-4 for catch can
-6 for coolant circulation connection between bottom of radiator and fill neck
-10 oil lines and oil fill neck (some will be nylon braided, and i got Stainless braided for the turbo drain which will be covered in black fireflex hose to protect it from the heat
-16 fancy radiator hoses

I have weld on bungs for all of that. And I also got a bunch of weld on NPT females for the new plenum, this way my AIT and meth nozzles will screw right in.

Also got a -4 check valve for the meth system. The pump has a built in one, but i wanted to ensure against boost leaks at 12psi when the pump isn't on yet.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-12-2011, 09:24 AM	#1
RX SE7EN Rotary Fanatic Join Date: Feb 2010 Posts: 183 Rep Power: 16	The build continues this weekend with new arrivals from Summit Racing Whats inside? A whole bunch of AN fittings, hose, and weld on bungs (steel and aluminum). Sizes are: -4 for catch can -6 for coolant circulation connection between bottom of radiator and fill neck -10 oil lines and oil fill neck (some will be nylon braided, and i got Stainless braided for the turbo drain which will be covered in black fireflex hose to protect it from the heat -16 fancy radiator hoses I have weld on bungs for all of that. And I also got a bunch of weld on NPT females for the new plenum, this way my AIT and meth nozzles will screw right in. Also got a -4 check valve for the meth system. The pump has a built in one, but i wanted to ensure against boost leaks at 12psi when the pump isn't on yet.