|
RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
Thread Tools | Display Modes |
10-25-2011, 10:03 AM | #4 |
WNC Tour Guide
|
To turn the fans on, it's a combination of at least 2 relays... I can look up the diagrams again if you need it because I can't remember the setup off the top of my head...
what have you changed recently that could contribute to the new behavior?
__________________
WNC Tour Guide - Including the Tail of the Dragon - PM for details
|
10-25-2011, 09:14 PM | #5 |
Rotary Fanatic
|
not to hijack.
But my FD - suddenly fan were not shutting off. I had to pull the fuse to get them to stop. Now fans won't run once temp is reached. But I can turn the car off, then on and the fan come to life. I am assuming it the fan relays. I plan on just replacing all of them. YZF - rx7.com may be able to help you and order the correct relay at the same time.
__________________
This is going to tear |
10-26-2011, 12:40 AM | #6 | |
Banned
|
Quote:
I wouldn't mind looking at the diagrams if you can post, thanks |
|
10-26-2011, 07:59 PM | #7 | |
Viable Fossil
|
Quote:
----> http://www.fd3s.net/fan_circuit.html
__________________
Jim VR R1 FD |
|
11-12-2011, 12:20 AM | #9 |
Rotary Non-conformist
|
There is also a recall control module added to the fd's located next to the ecu. It's a little black box that allows the fans to run if the car is turned off and the temp is at a certain range. I have had to replace said box to get this system to work again, before I removed the factory fans and relays from the car when I built a custom cooling system.
Last edited by rgould; 11-12-2011 at 12:23 AM.. |
11-13-2011, 03:38 PM | #15 |
Rotary Non-conformist
|
If the battery is of good condition 10 min or so fans running to remove heat should not be a problem. A lot of new cars now days have this kind of system and if I remember when the control box turns the fans off the system turns off (not sure on that but i think that's how it works.
|