280rwhp@9lbs of boost, stock turbo,stock ecu

Mazdabater · 10-12-2011, 06:47 AM

I'm just assuming 60 more rwhp picking up more mph then my 220ho car. As for the weight my car is probably heavier then stock by a little bit and I weigh 106kg so I doubt your heavier. As for mine taking .2 off my 60ft would probably take .4 or so off my et putting me at around a 13.1 and I'm sure it could have hit 1mph extra with some extra traction. Also if your clutch is that fucked you should even gain some rwhp on the dyno with a new one. I'm still not able to see 280hp. And picking up an extra 11rwhp gain going to 10psi on the stock turbo seems incredible to me given how inefficient they are up high.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-12-2011, 06:47 AM	#1
Mazdabater FC3S Join Date: Jun 2010 Location: Townsville, QLD, AUS Posts: 326 Rep Power: 16	I'm just assuming 60 more rwhp picking up more mph then my 220ho car. As for the weight my car is probably heavier then stock by a little bit and I weigh 106kg so I doubt your heavier. As for mine taking .2 off my 60ft would probably take .4 or so off my et putting me at around a 13.1 and I'm sure it could have hit 1mph extra with some extra traction. Also if your clutch is that fucked you should even gain some rwhp on the dyno with a new one. I'm still not able to see 280hp. And picking up an extra 11rwhp gain going to 10psi on the stock turbo seems incredible to me given how inefficient they are up high.