Pineapple Racing Graphite Mani Gasket?

Rotary_Rocket_87 · 04-07-2008, 02:02 PM

Yeah, the reason I am asking is because the stock one failed and I can't afford a stock one at the moment. I have read alot about how the stock gasket is reuseable and should outlast the life of the turbo, but I think that one of the previous owners must have taken off the turbo and reinstalled the gasket incorrectly (causing damage).

I think that I am going to try the graphite one, and if it fails it fails. I doubt that Pineapple would sell an inferior part. At least we will get some good information regarding the durability of this part.

thanks for the info Classic.

04-07-2008, 02:02 PM	#3
Rotary_Rocket_87 2nd Generation Freak Join Date: Mar 2008 Location: Chuck Vegas, NH Posts: 64 Rep Power: 18	Yeah, the reason I am asking is because the stock one failed and I can't afford a stock one at the moment. I have read alot about how the stock gasket is reuseable and should outlast the life of the turbo, but I think that one of the previous owners must have taken off the turbo and reinstalled the gasket incorrectly (causing damage). I think that I am going to try the graphite one, and if it fails it fails. I doubt that Pineapple would sell an inferior part. At least we will get some good information regarding the durability of this part. thanks for the info Classic. __________________ '87 TII- full emissions removal, a/c removed, FPD removed, dual 12" e-fans, Rotary Performance FCD, ACT unsprung 6 puck w/ Xtreme PP, custom open 2.5 inch exhaust, custom clutch pivot ball, K&N cone filter, TB mod, RB downpipe, motor blown 8/7/09 '94 Mazda B4000- POS beater truck, stock "The easiest way to fail is to never try." - Me

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode