Which turbo for 350whp on a 13BT

[RETed]

Originally Posted by Monkman33

If you want spool, go with the smallest turbo that will make the power you want without being too inefficient.

Going bigger than you need only moves your powerband further up the rpm range. Nothing more.

Not necessarily...


Another tip...
Your wastegate (actuator) vacuum source location can also influence boost.
Closer to the turbo (compressor) = faster reaction of wastegate = slower boost
Farther away from turbo (compresser) / closer to engine = slower reaction of wastegate = faster boost
Boost builds from the turbo (compressor) then into hot-side IC pipes then intercooler then cold-side IC pipes then throttle body / intake manifold...
The later you open the wastegate, the faster boost will build in the turbo.


-Ted