Stock FC Wiring Removal

NoDOHC · 05-10-2011, 09:13 PM

I know that you can remove the power steering computer with no ill effects.

The CPU controls the warning lights, etc. so you will want to keep it.

The ECU can be removed without hurting anything (as long as you replace it with an aftermarket one).

You will probably want to replace the Circuit opening relay with a much simpler design so that you don't have to worry about the AFM switch for the fuel pump (just control it with the ECU).

You will need to keep the existing alternator wiring, I don't know if it is worth going through the harness to remove all the A/C related wiring.

05-10-2011, 09:13 PM	#2
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	I know that you can remove the power steering computer with no ill effects. The CPU controls the warning lights, etc. so you will want to keep it. The ECU can be removed without hurting anything (as long as you replace it with an aftermarket one). You will probably want to replace the Circuit opening relay with a much simpler design so that you don't have to worry about the AFM switch for the fuel pump (just control it with the ECU). You will need to keep the existing alternator wiring, I don't know if it is worth going through the harness to remove all the A/C related wiring. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode