| 
	|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. | 
![]()  | 
	
	
| 
		 | 
	Thread Tools | Display Modes | 
| 
	 | 
| 
			
			 | 
		#1 | 
| 
			
			 Home-brew Rotary 
			
			
			
				
			
			Join Date: Feb 2008 
				Location: GooseCreek SC 
				
				
					Posts: 552
				 
				
				
				Rep Power: 18 ![]()  | 
	
	
	
		
		
		
		 
			
			This is exactly what happened with my gtu a few years ago. It would cut out on left hand cornering.  
		
		
		
		
		
		
			I took the fuel pump contraption out of the tank. And yes there was some dirt on the filter. But I also looked inside the tank and found a layer of deposits under where the pump sits. This layer was so thick that it touched the bottom of the filter. The baffles were not rusted through, it just had a load of deposits sitting in it. So i took my fuel tank out and cleaned it real good with water and paint thinner. Ever since then, no more problems. When i took it for a spin after I got it all back together again, I swear it felt like it had more power. lol. So just check the filter on the pump and clean it, and check inside the tank too for rusted baffles and/or a layer of deposits. Take necessary action depending on what you find. 
				__________________ 
		
		
		
		
	'89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily.  | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
		
			
		
		
		
	 | 
![]()  | 
	
	
| Bookmarks | 
| Thread Tools | |
| Display Modes | |
		
  | 
	
		
  |