Recently rebuilt 2nd gen suddenly won't start - where to begin?

[MmSadda]

Originally Posted by RXTASY

Pull the plug wires and put a screw driver to the tip of them and see if there is a spark arcing.
If there is, pull your two leading plugs, and yer EGI fuse and turn it over and blow all the gas out of it. Squirt a little motor oil in there while yer at it.
Try that.

As in, screwdriver in one hand, and one plug wire end in the other, right? how far apart should I hold them?

If there's no spark arcing, that means my trailing coil is not functioning, then, right?