Looking for new oil line and water injection line

[speedjunkie]

Originally Posted by TitaniumTT

Hit up Goodridge, those guys are awesome. You could call up FJO and get the specs on the fittings, size type etc, take those to Goodridge and tell them what you need. THEN you'll need to take the part numbers that they give you and call up Tom Sandal @ Carolina racing supply. Tom is a distributor for Goodridge and is there apparently everyday picking up custom lines to ship out. Pegasus is also a distributor for Goodridge IIRC. So you'll be buying Goodridge lines through Carolina Racing Supply and getting them custom fit to your application

Cool, I'll look into that. Thanks Brian!

Originally Posted by RX SE7EN

This will completely replace all OEM Oil lines with SS line & AN fittings using the dual OEM oil coolers. No fitment issues with A/C. Be sure to cover the SS lines with plastic loom at possible rub points.

http://www.batinc.net/

OIL COOLER FITTINGS………………………………………..........................P ART#............PRICE

4.... Male 22 MM X1.5 MM metric concave seat -10 AN aluminum...AM22AN10......12.95--- 51.80
13 ft -10 aeroquip line.............................................. .................FC3-10..............6.50---84.50
2.... 45 degree alu -10 hose end............................................... ....T45-10.............18.75---37.50
2.... straight alu -10 hose end............................................... ........TS-10.................8.95---17.90
1.... male 18 MM X 1.5 Metric concave seat to -10 AN steel...........AM18AN10.........9.85
2.... 90 degree alum -10 hose end............................................... .T90-10.............37.50
1.... "Metric Banjo -AN Male"............................................. .............BJ1810M..........30.15
1.... banjo bolt.............................................. .................................BJBM18........... .11.90
2.... seals............................................. ..........................................DS-M18................80--- 1.60

$282.70


You can get most of the fittings (except the banjo fittings and AN to metric adapters) from Summit racing cheaper. They have some AN to metric adapters but not the right size, and they don't have a good selection of banjo fittings.

I would also get the braided hose from Summit, its cheaper there too, especially the Braided Nylon Hose.

Oh I'm sorry man, I should have mentioned that I have aftermarket coolers on already. And I already have SS braided lines, so the only thing I want to use them on is the water injection because it will be running under the car and I want something durable. Or maybe I'll just fab up a metal hard line to run the length under the car. But the oil lines I want to move away from SS braided and switch to the lighter and more flexible stuff. Thanks for your input though!