Café Hercules Build

FC Zach · 02-14-2011, 03:05 AM

We're not completely wrapping the pan, just going to have a little pad. We have decided to make our own bars now that we have a pair of Baileigh tubing benders to play with

. I initially proposed the idea of using clip-ons but the top triple-tree will be weakened severely after the two post are removed since the unit isn't solid. If time permits we will fab up some rear sets, we just need to get the heim joints and geometry right.

I talk to Tigert on occasion since his father lives in the neighborhood. Next time he visits I'll ask him for you.

02-14-2011, 03:05 AM	#3
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	We're not completely wrapping the pan, just going to have a little pad. We have decided to make our own bars now that we have a pair of Baileigh tubing benders to play with . I initially proposed the idea of using clip-ons but the top triple-tree will be weakened severely after the two post are removed since the unit isn't solid. If time permits we will fab up some rear sets, we just need to get the heim joints and geometry right. I talk to Tigert on occasion since his father lives in the neighborhood. Next time he visits I'll ask him for you. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode