20B oil specs

hIGGI · 11-08-2009, 09:19 AM

I have few oil related questions regarding 20B

- what is stock oil pressure?

- what oil pump does fit (20b only? or FD or FC oil pump?)

- anybody making oil pan baffle for 20B?

Thanks!

hIGGI

hIGGI · 08-15-2010, 05:45 PM

umm...what about bump?

Akagis_White_Comet · 12-27-2010, 05:20 PM

Greeting hIGGI, I'm still working on my 20B. Since it's all stock, I'll be sure to get some oil pressure readings for you. My engine will have the stock FC sender on the turbo supply line, with a T-fitting there for a test port. The first start will have an external oil pressure gauge hooked up as well.

Pretty sure that FD uses the same oil pump. As for a baffle plate, that'd probably depend on if you're using the stock Cosmo oil pan (like I am) or a custom one (Christopher W.'s FC is). I know that Mazdaspeed has them for the stock pan Might suggest PMing GTORX7. (with the period) about what he'd suggest.

11-08-2009, 09:19 AM	#1
hIGGI Rotary Fan in Training Join Date: Mar 2008 Location: Czech Republic iTrader: (0) Posts: 78 Rep Power: 17	20B oil specs I have few oil related questions regarding 20B - what is stock oil pressure? - what oil pump does fit (20b only? or FD or FC oil pump?) - anybody making oil pan baffle for 20B? Thanks! hIGGI

12-27-2010, 05:20 PM	#3
Akagis_White_Comet Comealong busts your nuts Join Date: Jan 2009 Location: Columbus, OH iTrader: (0) Posts: 29 Rep Power: 0	Greeting hIGGI, I'm still working on my 20B. Since it's all stock, I'll be sure to get some oil pressure readings for you. My engine will have the stock FC sender on the turbo supply line, with a T-fitting there for a test port. The first start will have an external oil pressure gauge hooked up as well. Pretty sure that FD uses the same oil pump. As for a baffle plate, that'd probably depend on if you're using the stock Cosmo oil pan (like I am) or a custom one (Christopher W.'s FC is). I know that Mazdaspeed has them for the stock pan Might suggest PMing GTORX7. (with the period) about what he'd suggest. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-15-2010, 05:45 PM	#2
hIGGI Rotary Fan in Training Join Date: Mar 2008 Location: Czech Republic iTrader: (0) Posts: 78 Rep Power: 17	umm...what about bump?