More Holley questions...

Garfinkles Motor Works · 10-25-2010, 03:31 AM

To start cold the carb needs to be rich with no choke plate .TRY to pump the carb to spray gas in there with the accerator pump to make it rich . To check the sec plate opening pull a vacuum on the vacuum chamber to see if the diaphram is good . Then open the pri plate with the cable and pull the linkage for the sec plate to see if it will open .The pri plate must be open first .

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

10-25-2010, 03:31 AM	#2
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	To start cold the carb needs to be rich with no choke plate .TRY to pump the carb to spray gas in there with the accerator pump to make it rich . To check the sec plate opening pull a vacuum on the vacuum chamber to see if the diaphram is good . Then open the pri plate with the cable and pull the linkage for the sec plate to see if it will open .The pri plate must be open first .